Packaged compressor systems
Plug & play reciprocating compressor packages for cooling and heating. GEA reciprocating units are widely recognized for their simple, straightforward installation. Their features include efficient oil separators, low-maintenance V-belts or direct-coupling drivelines, and state-of-the-art electronic systems for general control.
Common to all packages is that they are based on GEA's reciprocating technology, which focuses not only on saving you energy and maintenance costs, but also on reducing your carbon footprint by using a natural refrigerant such as ammonia.
The reciprocating packages can be divided into single and/or two stage operation. Direct drive or V belt drive arrangements are available for V series based cooling compressors. The GEA Grasso 5HP, V HS, V HP and V XHP series are optimized for direct drive only. The optional use of frequency-controlled inverters in combination with maintenance-free couplings gives the customer the opportunity to positively influence energy and maintenance costs.
The extremely low oil carry-over, related to the design of the compressor particularly on cooling applications, can be even less than 10 ppm and gives the customer the opportunity to execute a compressor package with or without an oil separator, depending on the system demands. The use of GEA’s high-efficiency oil separator will further reduce the carryover to an absolute minimum, and oil contamination through to the installation.
The GEA Grasso V series and GEA FES VX series packages are based on the 2nd generation V series compressor, with a focus on maximum efficiency, reliability, and minimal maintenance, ensuring you the lowest operating costs. The single-stage and two-stage reciprocating compressor packages of the GEA Grasso V series and GEA FES VX series are available in several sizes, both in V-belt and direct drive configurations. They cover a wide capacity range suitable for applications from approximately +10°C to +35°C (+50°F to +95°F) for single-stage, and from -35°C to +35°C (-31°F to +95°F) for two-stage systems.
The GEA Grasso V HS package is based on the high-speed reciprocating compressor. This package offers a higher refrigeration capacity with a lower investment. Because of the proportional correlation of compressor speed, swept volume and resulting capacity, up to 25 % more capacity can now be gained using the same models.
The GEA Grasso V XHP compressors, which use ammonia, are designed for combining the highest efficiency to reduce maximum the carbon emission. With the ability to reach water temperatures of up to 95°C / 203°F and offering best-in-class efficiency, they are an ideal choice for heat pump systems.
The GEA Grasso V HP series package introduces ammonia reciprocating compressors with a maximum design pressure of 39 bar. This makes these models the first choice for all hot water applications up to 70°C / 158°F to meet most industrial requirements in the food industry and elsewhere, especially for cleaning and processing.
The GEA Grasso 5HP package includes four sizes suitable for both refrigeration and heat pump applications, combining a compact design with proven technology to ensure maximum efficiency and reliability.
Get 2D drawings and 3D model files of reciprocating packages delivered directly to your inbox with just a few clicks.
Experience the efficiency and completeness of the 3D package model generator in GEA RT Select now.
Around the world, GEA provides sustainable heating and cooling solutions. We work with our own contractors and also team up with trusted contractor customers in various domains. All the stakeholders – the end customer, the contractor, and GEA – benefit from the intense collaboration and combined expertise. GEA values a close partnership with its contractors.
In our Contractor Customer Talks video, we invite a GEA expert and a prominent contractor customer to talk about the challenges they face and the solutions they provide together in the cold store application, and specifically why a reciprocating compressor is a good choice for them.
Zuigercompressors voor CO2-vries- en NH3-warmtepomptoepassingen.
GEA’s industriële zuigercompressoren staan voor lagere totale eigendomskosten (TCO) dankzij een geringer energieverbruik en maximale betrouwbaarheid.
Zuigercompressoren voor industriële koeling
Een hogedruk-zuigercompressor met ammoniak die van de meest efficiënte NH₃-verwarmingspomp, de GEA RedGenium, de beste in zijn klasse maakt.
Een verstandige aanvulling op uw koelsysteem. De ammoniakdroger verwijdert water uit de koelmiddelcyclus en is de perfecte aanvulling op uw ammoniakkoelsysteem, samen met filters en ontluchters.
PR-OLEO® premium-quality ammonia refrigeration oils are highly refined 2-stage hydrocracked lubricants formulated specifically for use in ammonia refrigeration systems with either reciprocating or screw compressors.
De vraag naar koffie stijgt snel. Ontdek hoe GEA’s continue extractietechnologie de opbrengst opvoert, de smaak behoudt en grondstoffen bespaart.
De impact van de opwarming van de aarde wordt overal ter wereld steeds duidelijker. Dorpen en steden worden overal geconfronteerd met dezelfde uitdaging: hun gemeenschappen voorzien van betrouwbare, betaalbare, duurzaam ingewonnen warmte. GEA sprak met Kenneth Hoffmann, Manager, Heat Pumps bij GEA Heating & Refrigeration Technologies, en expert op dit gebied, over een snellere aanpak van de opwarming van de aarde.
Veehouder Tom viel iets op. In plaats van een andere productdemo, toonde GEA innovaties via AR. Dat is nog maar het begin van GEA’s interactieve digitale veebedrijf.