Reciprocating Compressors
The GEA Grasso V XHP compressors, that use natural refrigerants such as ammonia, are designed to minimize their environmental impact. With the ability to reach water temperatures of up to 95°C / 203°F and offering best-in-class efficiency, they are an ideal choice for heat pump systems.

GEA Grasso V series reciprocating compressors offer the efficiency, quality and reliability needed to achieve the lowest possible total cost of ownership (TCO) throughout their service life.
The V series is designed to use the natural refrigerant ammonia (R717) to achieve the highest efficiency. It can be used for heating and cooling applications, and can achieve hot water temperatures of up to 95°C / 203°F.
The use of high-end materials and proven technology helps to ensure max. reliability. In addition to the standard benefits of the V series, a unique drain system and continuous safety monitoring are integrated in the design.
The electronically measured flexible and extended service intervals, minimize maintenance costs during the long service life of these compressors.
A unique welded compressor housing minimizes thermal losses due to excellent suction and discharge separation. Optimized gas flow within the compressor results in high efficiency and very low oil carryover.
| Models of GEA Grasso V XHP |
V 350 XHP (4 cylinder) / V 550 XHP (6 cylinder) / V 750 XHP (8 cylinder) / V 950 XHP (10 cylinder) |
|---|---|
| Refrigerant | R717 |
| Heating capacity 35 / 95 °C (95 / 203°F) | Approx. 700 to 2300 kW (2400 to 7847 MBH) |
| Maximum discharge pressure | Tc = 95°C / 203°F |
| Speed minimum / maximum | 500 / 1500 rpm |
| Total swept volume at full load 1500 rpm | 376 to 941 m3/hr (221 to 554 CFM) |
| Drive type | Direct drive |
| Design discharge pressure | 63 bar(g) / 913.7 psi |
| Controls | GEA Omni control panel |

GEA Grasso V XHP, a proven high-efficiency reciprocating compressor, is also available for high-temperature heat pump applications, particularly for use with the GEA RedGenium heat pump.
The GEA Grasso V XHP series can achieve water temperatures of up to 95°C / 203°F with a maximum design pressure of 63 bar(g) / 913.7 psi and offers a wide capacity range up to 2.300 kW. This makes this model the first choice for hot-water applications to meet industrial requirements for food & beverage, district heating, and other applications.

GEA Grasso V series reciprocating compressor
GEA RedGenium now up to 95°C/203°F

Verhoogt de efficiëntie en verbetert de eigenschappen van iedere industriële koelinstallatie.

GEA’s industriële zuigercompressoren staan voor lagere totale eigendomskosten (TCO) dankzij een geringer energieverbruik en maximale betrouwbaarheid.

Zuigercompressors voor CO2-vries- en NH3-warmtepomptoepassingen.

Zuigercompressoren voor industriële koeling
De vraag naar koffie stijgt snel. Ontdek hoe GEA’s continue extractietechnologie de opbrengst opvoert, de smaak behoudt en grondstoffen bespaart.
De impact van de opwarming van de aarde wordt overal ter wereld steeds duidelijker. Dorpen en steden worden overal geconfronteerd met dezelfde uitdaging: hun gemeenschappen voorzien van betrouwbare, betaalbare, duurzaam ingewonnen warmte. GEA sprak met Kenneth Hoffmann, Manager, Heat Pumps bij GEA Heating & Refrigeration Technologies, en expert op dit gebied, over een snellere aanpak van de opwarming van de aarde.
Veehouder Tom viel iets op. In plaats van een andere productdemo, toonde GEA innovaties via AR. Dat is nog maar het begin van GEA’s interactieve digitale veebedrijf.