To protect refrigeration and air conditioning systems from moisture, dirt, acids, oil decomposition products and sludge sediments.

Filters

GEA filter driers are equipped with filter blocks designed for easy replacement. The blocks are held in position by the filter carrier which also acts as a strainer. The liquid refrigerant enters the filter through the side entry and flows through the filter blocks and the filter carrier strainer. The filter blocks consist of an adsorption mass based on molecular sieve aluminum oxide. GEA filter driers are designed for use in the pipes of refrigeration and air conditioning systems with fluorinated refrigerants and also as a cleaning drier on the suction side. They protect the system from moisture, dirt, acids, oil decomposition products and sludge sediments. The dimensions of the filter blocks comply with international standards.

Technical Features

  • Available in steel or stainless steel
  • Selection of body material as per German DIN EN12284, AD2000 Series W
  • Working media: liquid refrigerant, no NH3
  • Mesh width of strainer / filter carrier (μm): 125
  • Optimum filter surface (zeolithic molecular sieves)
  • No danger of plugging
  • Minimal pressure loss
  • Particle retaining power > 32 μm
  • No abrasion from the filter block
  • Binding of water molecules
  • Protection against dirt, oil decomposition products and sludge formation
  • Prevention of acidification
  • Assembly is possible in any position
FT Filter Driers
materialsteel or stainless steel
nominal sizeDN 20-150
nominal pressure levelPS 25, PS 40
temperature range for standard valves-60 °C bis +150 °C
temperature range for HT valve series-10 °C bis +200 °C
connectionbutt welding and flanged ends as per DIN and ANSI
GEA AWP FT Filter Driers

GEA-inzichten

De koudeketen toekomstbestendig maken met duurzame koeltechniek

Het belang van een kwaliteitsbeheer van de koudeketen mag niet worden onderschat. Ervoor zorgen dat bederfelijke voedingsmiddelen op het moment van consumptie veilig en van hoge kwaliteit zijn, is een enorme verantwoordelijkheid...

Josep Masramón and his daughter stand in front of their GEA batch milking installation.

Hoe groepsmelken de moderne melkveehouderij ondersteunt

De nieuwste evolutie in automatisch melken introduceert groepsmelken; een praktijk in de melkveehouderij waarbij koeien, meestal twee of drie keer per dag, op vaste tijden in groepen worden gemolken. Met de automatiseringstechnologie...

Uit de lucht gegrepen

Toegang tot veilig water en sanitaire voorzieningen vormt in veel landen nog steeds een uitdaging. In verband met ziekte door vervuild drinkwater en dagelijkse tochten om het te gaan halen, kunnen veel kinderen niet naar school....

Ontvang nieuws van GEA

Blijf op de hoogte van GEA’s innovaties en verhalen door u in te schrijven op nieuws van GEA.

Neem contact met ons op

Wij zijn er om je te helpen! Met slechts een paar gegevens kunnen we je vraag beantwoorden.