At best-in-class efficiency, the GEA Blu-Red Fusion is particularly suited for combined cooling and heating applications with high temperature lifts between heat source and heat sink, where single stage compression would otherwise be inefficient or impossible. Whether in the food, dairy or beverage industry, the GEA Blu-Red Fusion is ideal for cooling and heating applications such as hot water washdown for abattoirs or pasteurization processes. The Fusion is also the first choice for heating only applications, such as district and facility heating, using low-temperature heat sources including water from the environment or sewage and wastewater.
GEA Blu-Red Fusion models are based on the existing Blu chiller (BluAstrum or BluGenium) and Red heat pump (RedAstrum or RedGenium) family and offer the same features and benefits. The Blu-Red Fusion can be easily configured as one product in the product selection and configuration tool GEA RT Select which perfectly matches Blu chiller and Red heat pump modules with respect to the project specific requirements.
Efficiency-optimized configuration minimizes total costs and CO₂ emissions
The intermediate stage is equipped with a single, high-efficient ammonia - ammonia ’cascade’ heat exchanger. This connection of the low and high stage, with two separated refrigeration circuits, allows the free combination of different models and minimizes the total refrigerant charge. The absence of an intermediate liquid circuit reduces the equipment effort and capital investment, reduces the differential pressure of both stages, and does not waste power on glycol or water pumps. The efficiency benefit easily reaches double digit numbers. This means a dramatic reduction of energy costs and CO2 emissions.
Full flexibility with three different operating modes
The GEA Blu-Red® Fusion offers the highest flexibility for individual operating requirements and seasonal demands. As well as simultaneous cooling and heating in full- or part-load (‘mode 1’), it is possible to switch off the heat pump stage and operate the chiller stage only, when there is no heating demand (‘mode 2’). Finally, the heating capacity can be regulated (reduced) irrespective of the cooling capacity demand (‘mode 3’). It’s also possible to save costs by configuring the Fusion for constantly lower heating demands to prevent unnecessary oversizing of the heat pump module.
Highlights and technical features
- Broad range of models for combined cooling and heating applications
- Full flexibility with different operating modes
- Highest efficiency and lowest energy consumption
- Future-proof with the natural refrigerant ammonia (R717) – in accordance with the F-gas regulation, the initiative for the prohibition of F-gases
- Cooling capacity range approx. 325 – 1,730 kW *)
- Heating capacity range approx. 425 – 2,425 kW *)
- Heat carrier supply temperatures up to +80°C|+176°F (higher temperatures on request)
- Secondary refrigerant outlet temperature range between -15°C|+5°F to +15°C|+59°F
- Fully welded shell & plate heat exchanger
- Various plate materials available, all common liquids supported
- Efficiency-optimized configuration with minimized energy costs and CO2 emissions
- Stepless capacity control via frequency inverter, additionally screw compressors with capacity slide and reciprocating compressors with cylinder switch-off
- Industry-leading controller technology with GEA Omni
- Based on well-proven equipment, GEA Blu chiller and Red heat pump know-how and experience
*) Sec. refrigerant +12°C|+53.6°F / +6°C|+42.8°F, heat carrier +40°C|+104°F / +70°C|+158°F
Learn more with GEA RT Select – our product selection and configuration tool.
Technical Data
GEA Blu-Red® Fusion
| Type 1) |
Heat carrier (°C) |
Heat carrier (°F) |
Cooling capacity (kW) 2) |
Heating capacity (kW) 2 |
COP combined 3 |
| in/out | in/out | line | |||
| BG300-RG35 | 40 / 70 | 104 / 158 | 205 | 275 | 6,40 |
| BG300-RG45 | 40 / 70 | 104 / 158 | 260 | 350 | 6,35 |
| BG450-RG55 | 40 / 70 | 104 / 158 | 335 | 450 | 6,38 |
| BG450-RG65 | 40 / 70 | 104 / 158 | 430 | 575 | 6,44 |
| BG450-RG300 | 40 / 70 | 104 / 158 | 480 | 625 | 6,86 |
| BG600-RG450 | 40 / 70 | 104 / 158 | 670 | 875 | 6,84 |
| BG900-RG450 | 40 / 70 | 104 / 158 | 840 | 1100 | 6,78 |
| BG1200-RG600 | 40 / 70 | 104 / 158 | 1275 | 1670 | 6,80 |
| BG1400-RG750 | 40 / 70 | 104 / 158 | 1470 | 1950 | 6,56 |
| BG1800-RG950 | 40 / 70 | 104 / 158 | 1810 | 2400 | 6,61 |
| BA400-RAEC | 70 / 80 | 158 / 176 | 255 | 450 | 3,33 |
| BA500-RAED | 70 / 80 | 158 / 176 | 350 | 600 | 3,52 |
| BA800-RAHE | 70 / 80 | 158 / 176 | 465 | 800 | 3,44 |
| BA900-RAHG | 70 / 80 | 158 / 176 | 565 | 950 | 3,59 |
| BA1000-RAMH | 70 / 80 | 158 / 176 | 745 | 1.250 | 3,58 |
| BA1500-RAML | 70 / 80 | 158 / 176 | 870 | 1450 | 3,67 |
| BA1800-RARM | 70 / 80 | 158 / 176 | 1090 | 1800 | 3,73 |
| BG450-RG350 | 70 / 95 | 158 / 203 | 340 | 500 | 4,80 |
| BG600-RG350 | 70 / 95 | 158 / 203 | 510 | 750 | 4,86 |
| BG900-RG350 | 70 / 95 | 158 / 203 | 680 | 1000 | 4,86 |
| BG1200-RG550 | 70 / 95 | 158 / 203 | 1125 | 1650 | 4,86 |
| BG1400-RG750 | 70 / 95 | 158 / 203 | 1420 | 2100 | 4,80 |
| BG1800-RG950 | 70 / 95 | 158 / 203 | 1695 | 2500 | 4,82 |
1) Blu Chiller - Red Heat Pump type connotation: BG = BluGenium, BA = BluAstrum, RG = RedGenium, RA = RedAstrum, BG/BA/RG numbers refer to model size,
RA letters refer to compressor housing and swept volume size.
2) BG/RG reciprocating compressor speed max. 1500 rpm, BA screw compressor speed max. 4500 rpm, RA screw compressor speed max. 3600 rpm (RM, RN, RR types limited to 3300 rpm).
3) COP combined = cooling plus heating capacity / power consumption at net.
Downloads
Aanverwante producten
Aangepaste GEA-warmtepompen
Industriële warmtepompen met modulaire opzet voor toepassingen met hoge temperaturen.
GEA BluGenium
Met een ESEER >9 benutten deze modellen het potentieel van het concept van de GEA Blu-chiller ten volle.
GEA RedAstrum
De nieuwe serie standaard ammoniakwarmtepompen, ontworpen voor een toenemende vraag naar efficiënte verwarmingsoplossingen.
GEA RedGenium
Een uitstekende performer wordt nog beter: hogere temperaturen, een groter capaciteitsbereik, de beste efficiëntie in zijn klasse, een grotere duurzaamheid tegen lagere totale kosten - de nieuwe GEA RedGenium warmtepomp heeft het allemaal. CE-gecertificeerd.
Serviceproducten
GEA Ammoniakdroger
Een verstandige aanvulling op uw koelsysteem. De ammoniakdroger verwijdert water uit de koelmiddelcyclus en is de perfecte aanvulling op uw ammoniakkoelsysteem, samen met filters en ontluchters.
GEA Compressor Conversion Kit (GCCK)
Update your existing screw compressor packages
GEA Purger
Verhoogt de efficiëntie en verbetert de eigenschappen van iedere industriële koelinstallatie.
PR-OLEO® Premium-Quality Ammonia Refrigeration Oils
PR-OLEO® premium-quality ammonia refrigeration oils are highly refined 2-stage hydrocracked lubricants formulated specifically for use in ammonia refrigeration systems with either reciprocating or screw compressors.
GEA Omni-retrofitpaneel
De intuïtieve touch voor de besturing van schroef- en zuigercompressoren. Krachtig, maar toch toegankelijk. Rationeel, maar toch intuïtief. Geavanceerd, maar toch eenvoudig. Simpelweg– GEA Omni.
GEA Service Kits voor schroef- en zuigercompressoren
Welkom in de wereld van eenvoud met GEA Service Kits voor schroef- en zuigercompressoren. Onze missie is duidelijk; uw ervaring met originele reserveonderdelen naadloos en uw activiteiten vlotter dan ooit maken. "Rustig aan, gebruik een kit" is niet zomaar een slogan; het is een belofte die we waarmaken.
Gerelateerde video's
Animatie over hoe warmtepompen werken
GEA-inzichten
De waterbalans
In heel Europa is droogte een terugkerend verschijnsel – en dat blijft niet langer beperkt tot het zuiden. Hoewel bedrijven hun vestigingsplaats steeds vaker kiezen op basis van de beschikbaarheid van water, wordt de waarde ervan bepaald door de lokale context. Er zijn tal van technologische manieren om het waterverbruik in industriële processen te optimaliseren, maar ook de locatie, de energiebehoefte en andere factoren spelen een cruciale rol.
