Add Better

GEA‘s Add Better solutions

Empowering customers with resource-efficient solutions

Add Better – Resource-efficient solutions from GEA

Com a tecnologia ABF, bebidas assépticas com diferentes prazos de validade, sejam de baixa acidez (LA) ou alta acidez (HA), podem ser envasadas no mesmo sistema

Aseptic Blower

Compared to its predecessor, the special air recovery system of GEA’s ABF 2.0 uses 31% less energy for bottling. It compresses the air that is needed for blowing process and cap sterilization.

Aseptic Filler

The new water rinsing unit of the GEA EcoSpin2 Zero achieves massive water savings of up to 91% when installed as new machinery and 83% when upgrading the installed base.

Bilge Water Separator

The GEA bilge Separator with integrated direct drive is designed to clean oily water using a high efficiency motor that transfers energy directly to the bowl without belts or clutches, reducing energy consumption by 13%.

Carbon Capture

GEA's integrated Waste Heat Recovery and Carbon Capture solution enables a significant reduction of the overall energy consumption and by that also of CO2 emissions by 11% compared to a stand-alone Carbon Capture solution without Waste Heat Recovery.

Centrifuge Cooling

The GEA Centrifuge Water Saving Unit reduces the cooling water consumption for separators by 100% compared to conventional cooling.

Clean & Pump

The high-performance GEA Hilge NOVATWIN+ saves an average of 13% energy compared to its predecessor model thanks to its higher efficiency with a smaller pump.

Craft Beer Separator

The GEA plug & win i separator skid features a new integrated direct drive which reduces the energy consumption by up to 10% compared to its previous model.

Drum Forming

MaxiClean drum cleaning machine, a dedicated part of the MaxiFormer drum forming system, saves food manufacturers up to 62% of their water consumption when processing formed products compared to previous versions.

We engineer sustainable solutions to support our customers. Learn more about Add Better.

Environmental Decanter

The GEA environmental Decanter pro provides an energy-efficient solution for both municipal and industrial sludge treatment. Depending on the machine size, it offers energy savings of 15 to 60%.

Heat Pump

Um executante comprovado se torna ainda melhor: Temperaturas mais altas, faixa de capacidades alargada, eficiências da mais alta categoria, maior sustentabilidade a custos totais mais baixos - a nova bomba de calor GEA RedGenium tem tudo isso. Certificação CE.

Homogenizing Valves

The NanoVALVE improves viscosity and stability in food, dairy, beverage and chemical emulsions, consuming 20% less energy than previous versions.

Homogenizing Valve

The coneVerge® homogenizing valve is suitable for dairy, food and beverage products sensible to homogenization pressure.
Thanks to the innovative design the valve obtains outstanding homogenization performances at Ultra Low Pressure range, allowing energy savings up to 20%.

Marine Separator

The GEA marine Separator with integrated direct drive efficiently purifies fuel and lube oil using a high-efficiency motor that transfers energy directly to the bowl without belts or clutches, reducing energy consumption by 9%.

Membrane Filtration Cleaning

GEA Smart Filtration CIP is a software-based method of operating pumps while cleaning membrane filtration plants in a pulsating way, consuming up to 46% less energy.

Membrane Filtration Flushing

Smart Filtration Flush is a software-based solution designed to reduce water consumption by up to 52% during CIP Flush.

Centrifuge Separator MSI Milk Whey Skimming

Milk and Whey Separator

The new GEA Advanced Water Supply of the Separator Series MSI enables a process-oriented reduction of cooling and operating water consumption by minimum 48%.

From a single product to entire productions and consulting services. Learn more about Add Better Consulting.

Pasta pasteurization solution

Revolutionize your fresh pasta production with the GEA PureWave Pasteurizer. Enhance quality, reduce energy and water usage, and cut operational costs with a sustainable and compact pasteurization solution.

LYOVAC® ECO Mode: A Solution for Tomorrow

Pharma Freeze drying

Freeze dryers are typically associated with high levels of energy consumption. To counteract this issue, GEA Pharma & Healthcare has introduced the LYOVAC® ECO Mode.

GEA Pre2Fuel - The better HVO and SAF pretreatment

Pretreatment for HVO and SAF

Save up to 50 percent in OPEX and up to 12 percent in CO2 emissions with the new HVO pretreatment process from GEA.

Separator for edible oil refining

The GEA Advanced Water Supply of the Separator Series RSI enables a process-oriented reduction of cooling and operating water consumption by minimum 48%.

Slow-rotating skimming separators

Dairy separators from the GEA EngySpeed series feature an "oversized" design and operate at a lower bowl Speed - significantly reducing energy requirements by up to 40 % while maintaining the same performance.

Sistema de bombas de calos GEA AddCool para secadoras por pulverização

Spray Drying

A heat pump solution for spray dryers, AddCool allows milk powder producers to reduce energy consumption by up to 49%.

Otimização do processo com GEA OptiPartner

Spray Dryer Optimization

By applying advanced model-predictive control, GEA OptiPartner improves process stability and capacity utilization in spray drying. This translates to higher productivity and typically 10% lower energy use.

Spiral Oven

Master industrial cooking with CookStar. Steam, cook, roast or smoke in one oven. High yield, consistent quality, and unmatched flexibility for high-throughput food production.

Rotary Tablet Press | NexGen Press® 30

The GEA NexGen Press® 30 achieves a remarkable 21% reduction in power consumption compared to previous ranges of tablet presses.

Tablet press | CDC

The ConsiGma® DC for direct compression is the latest expansion of GEA's continuous portfolio for cost effective, compact, high yield manufacturing systems. It offers a robust and flexible manufacturing method for a wide range of products.

Sistema de aquecimento zonado GEA PowerHeat

Thermoforming

GEA PowerHeat, a peça que falta na Termoformagem de Embalagens: aumenta a produtividade em até 10%, economiza energia em até 30% e permite o uso de filmes monocamada sem comprometer a qualidade e a funcionalidade da embalagem.

Tunnel Oven GEA E-Bake

O processo de cozimento tradicional foi renovado graças aos novos sistemas de aquecimento elétrico.

Tunnel Oven GEA E-Bake G2

Electric baking innovation for a greener future: zero emissions, maximum versatility and premium quality.

Tunnel Oven E-Switch-Bake

The electric oven retrofit kit GEA E-Switch-Bake enables bakeries to switch from high-consumption gas ovens to more sustainable electric options, saving up to 14% of energy.

LEFF® function integrated in GEA T.VIS A-15 control top

Valve Control

GEA’s electronic LEFF® function on top-tier T.VIS® A-15 valve control tops can conjure up to 92% reduction in the amount of water and cleaning agent used during valve seat cleaning.

Varipond C

For always top separation results you have to adjust your decanter settings to varying feed conditions, flow rates or even to different feedstocks. With GEA Varipond C those adjustments are now so easy, fast and precise that your separation zone turns into a comfort zone.

Wort Boiling

O GEA QBOIL® integra as tecnologias avançadas de fed-batch, ebulição fracionada e retificação em um único processo altamente eficiente. Esse sistema inovador reduz significativamente o consumo de energia durante o cozimento do mosto, o que o torna um complemento essencial para qualquer cervejaria moderna focada na economia de eletricidade.

We engineer sustainable solutions to support our customers. Learn more about Add Better.

DairyFeed F4500 – Robô de Alimentação da GEA

Feeding system

Coloque em prática suas estratégias de alimentação com precisão

O sistema de ordenha rotativa da linha de produtos GEA DairyRotor

Milking solution

Alto desempenho em um design único: Desfrute do excelente desempenho da ordenha, do conforto e durabilidade

Milking solutions

GEA’s DairyRobot solution for automated milking requires up to 19% less energy than its predecessor.

Milking solutions

O DairyRotor T8600 é o nosso potente e versátil equipamento para a atividade pecuária em estábulos e pastagens. Com ergonomia de trabalho premium, conforto animal reconhecido e unidades de controle de ordenha DigiTron avançadas, ele assegura transições rápidas das vacas e operações perfeitas.

Receba notícias da GEA

Mantenha-se atualizado com as inovações e histórias da GEA, se registrando para receber notícias sobre a GEA.

Registrar-se

Entre em contato

Estamos aqui para ajudar! Com apenas poucos detalhes poderemos responder à sua pergunta.

Entre em contato

A GEA é um dos maiores fornecedores de sistemas do mundo para os setores de alimentos, bebidas e farmacêutico. Nosso portfólio inclui máquinas e plantas, bem como tecnologia de processo avançada, componentes e serviços abrangentes. Usados em diversos setores, eles aprimoram a sustentabilidade e a eficiência dos processos de produção em todo o mundo.

A GEA está listada nos índices DAX e no STOXX® Europe 600 e também está incluída entre as empresas que incluem os índices de Sustentabilidade Global DAX 50 ESG e MSCI.

Impressão & termos de uso

Aviso sobre proteção de dados

Configurações de cookies