Efficient, robust, yield-optimized
GEA starchmaster CF decanters for wheat starch
Decanter centrifuges are the heart of every wet separation process line to obtain starch. For wheat starch, 3-phase decanters separate the prepared dough into gluten and fine particle starch (B-starch), crude starch (A-starch) and a liquid phase containing dissolved materials (pentosanes).
Always the right setting with GEA Varipond C
Feed composition and flow rates can vary, especially with natural products. To maintain top separation performance, the decanter must adapt. With GEA Varipond C, you can instantly adjust pond depth and the separation zone – even during operation.
Just select the diameter, manually or automatically, and the system adjusts automatically to changing feed conditions. With Varipond C you can even program and save recipes in your control system to select the optimum operation mode with the touch of a button.
Highest purity and energy efficiency
The deep pond design of the bowl results in excellent clarification results. The deeper pond makes for higher pressure onto the separated solids. On top, the solids are discharged at a smaller diameter in deep pond bowls compared to shallow pond designs. This reduces the energy consumption of your decanter.
Stop stick-slip with Active Torque Control
In starch processing, stick-slip in decanters can cause costly damage. GEA’s Active Torque Control (ATC) detects and stops it early – automatically.
Using smart sensors, ATC adjusts speed to prevent stick-slip with minimal impact on performance. The result: dry solids, no downtime, and lower drying costs – all hands-free.
GEA offers the ATC automated monitoring and control system also as retrofits for already installed starchMaster decanters.
Sanitary design: automatic CIP routine, spray nozzles, box distributor
Fast and slow - the perfect bowl speed combination for CIP (cleaning-in-place)
During CIP, we first speed up the bowl to maximum speed to use as much centrifugal force as possible to get the surfaces clean. In the second phase of our CIP cleaning cycle the speed is reduced and the liquid ring collapses. This leads to high splashing and turbulence inside the bowl with the result that the CIP liquid hits every corner and every spot.
Spray Nozzles
Box distributor
Productos relacionados
Nozzle Separators for Starch Recovery
Nozzle separators are used for washing and concentrating the crude starch as well as for gluten thickening. A high quality starch can only be obtained if the small fiber fragments, lipids, proteins and dissolved substances are washed out from the starch fraction efficiently. For this process steps GEA offers 2-phase and 3-phase nozzle separators,...
Clarifying Decanters for Starch Recovery
For starch recovery clarifying decanters are installed in different process stages depending on the raw material.
GEA Insights
Una visión realista del sector biotecnológico
El nuevo Centro de Aplicaciones y Tecnología (ATC) de GEA en Sarstedt, al sur de Hannover, no es una sala de exhibición ni sustituye a un laboratorio. Es un lugar destinado a realización de pruebas, recopilación de datos y toma de decisiones en una fase temprana. Es en este punto donde queda claro si un concepto biológico puede convertirse en un proceso industrial robusto. Ese paso es más importante de lo que podría parecer.
Cambios en el envasado de alimentos: 4 tendencias
El termoformado lleva mucho tiempo desempeñando un papel fundamental en el envasado de alimentos. Ahora se enfrenta a un cambio importante. A medida que se endurecen las normativas, evolucionan los materiales y aumentan los costes, las líneas de envasado formado, llenado y sellado deben hacer algo más que funcionar de forma fiable: ahora determinan cómo los alimentos se mantienen frescos, asequibles y reciclables. Eche un vistazo a las principales tendencias en termoformado que están marcando el panorama del envasado y entrega de alimentos.
