EVAPORATION TECHNOLOGY
CompaCon® Evaporators
The next big thing on small-scale production.
Skid-mounted Falling Film and Forced Circulation Evaporators.
The GEA CompaCon® Evaporators are highly adaptable and compact evaporators; easy to transport, assemble, install and operate.
They use the reliable Falling Film (FF) and Forced Circulation (FC) evaporation technologies on the most diverse applications, from food production to chemical and wastewater treatment. The GEA CompaCon® FC Series is the option to go with when working with highly viscous liquids.
Both series present the benefits of a standardized system while portraying maximum flexibility, offering fast commissioning, guaranteeing a lower time investment in engineering and delivery.
Particular features:
- Sizes
Ranging from 20-3000l/h water evaporation. - Energy efficient
Can be fully electrically powered with a COP of 30. - Time saving
The CompaCon® Evaporators have a preassembled skid design to be installed within 2 days. The pre-commissioning before shipment allows for them to start up within a week. - Easily transportable
The units can be shipped in sea freight containers. - GEA HMI
Standardized GEA Codex HMI compatible with all other GEA CODEX units. - Product specific design
A small sample of the customers' specific product can be tested in our R&D center, making specific process warranties possible.
Applications:
- Proteins (Insect, animal and plant based)
- Food ingredients & texturizers
- Wastewater with high solid freights
Additional Modules:
Boost your CompaCon® and complement your process by adding modules.
- Feed balance tank
Design to feed product/CIP or emergency water. - Direct steam injection
Design as a sterilization step for the concentrated product. - Virtual commissioning (GEA Test Twin)
High End Factory Acceptance Test of the PLC software and perfect operators training tool on start up, production, shut down and cleaning weeks before the plant is installed.
FF Series
CompaCon® FF Series
With a range of 50-3000 l/h, the CompaCon® FF Series is a Falling Film evaporator suitable for food production as well as chemical and waste-water treatment applications.
On its XS size, the CompaCon® FF Series can act as a pre-concentrator for a GEA Mobile Minor® spray dryer, boosting the powder production up to five times and giving the powder a finish closer to that of an industrial plant.
This Series has two power options depending on the evaporator's size:
Smaller sizes are powered with thermal energy by means of a Thermal Vapor Recompressor (TVR) whereas the larger sizes are powered with a Mechanical Vapor Recompressor (MVR), the latest steam-free development of small-scale MVRs and driven solely on electrical energy, guaranteeing a reduced CO2 footprint and cooling water demand.
Working principle of a Falling Film Evaporator
FC Series
CompaCon® FC Series
With a range of 50-1500 l/h, the CompaCon® FC Series is a Forced Circulation Evaporator apt for food production as well as chemical and waste-water treatment applications. Best suited for working with highly viscous liquids and insoluble containing products.
The special logic-control of the CompaCon® FC series, guarantees the plant to run on the desired concentration. Only compliant end-product will be discharged. Any deviation from the ideal concentration will stop the discharge until the desired concentration is reached again. The discharge will be continuous for big discharge rates and intermittent for small ones
The CompaCon® FC Series comes in one piece, already fully mechanically and electrically assembled, ready for the utilities to be plugged in. The unit, fully checked and pre-commissioned with water, can be shipped in one sea freight container.
Available on sizes S and M, it can be powered with thermal energy by means of a Thermal Vapor Recompressor (TVR).
Working principle of a Forced Circulation Evaporator
Heating options for thermal separation plants
Size |
Heating principle |
Evaporation capacity |
|
XS |
Steam |
20-100l/h |
|
S |
Steam |
100-500l/h |
|
M |
Steam / Electrical |
500-1500l/h |
|
L |
Steam / Electrical |
1500-3000l/h |
Size |
Heating principle |
Evaporation capacity |
|
S |
Steam |
100-500l/h |
|
M |
Steam |
500-1500l/h |
Want to learn even more?
Webinar: GEA CompaCon® Evaporators
Watch our webinar that's available on demand!
- Get to know what makes our CompaCon® Evaporators so outstanding.
- Learn all the ways in which they can be customized to your specific needs.
- Find out the unique advantages that come with a CompaCon® Evaporator.
- Come in touch with real life application examples.
Downloads
İlgili Ürünler
Multi-Flaş Evaporatörler
Nispeten düşük konsantrasyon katsayısına sahip proses solüsyonu ile büyük miktarda ürün çıktısı gerektiren uygulamalar ve diğer uygulamalar içindir.
Karlsruhe ARGE Merkezindeki Evaporasyon Test Tesisleri
Farklı türde evaporatör sistemleri için laboratuvar ve pilot tesis testleri için test merkezleri mevcuttur.
Düşey Film Evaporatörü
Sıcaklık-hassas ürünler ile az miktarda katı madde içeren ve yüksek konsantrasyonlara çıkan sıvılar için çok uygundur
Zorunlu Sirkülasyonlu Evaporatör
Oldukça viskoz sıvılar veya kirlenme eğilimi olan sıvılar için idealdir. Diğer uygulamaların yanı sıra tuzlu çözeltiler için de optimumdur.
İlgili Videolar
Falling Film Evaporation heated by MVR
GEA İçgörüleri
Kytero 10 - büyük değişiklikler küçük başlar
GEA kytero 10 ile, biyofarmasötik, gıda ve yeni gıda endüstrilerindeki araştırmacılar ve geliştiriciler şimdi güçlü bir hızlandırıcının son nesline sahipler.
Fueling the circular economy in shipping
Ports now compete not just on logistics, but on sustainability. At Greece’s Piraeus port, an advanced processing and recovery facility recycles ship waste oil into fuel. Equipped with GEA’s high-performance centrifuges, it sets a new benchmark for state-of-the-art, environmentally responsible port operations.
Menüde: daha sürdürülebilir yumurtalar
GEA, müşterilerin hassas fermantasyon yöntemiyle üretilen alternatif yumurta ürünlerini ve bileşenlerini test etmesine ve ölçeklendirmesine yardımcı oluyor.
