Industrial effluents
Tailings
Tailings, the residual materials left after mineral extraction, pose significant environmental challenges due to their high water content and potential contaminants. Effective dewatering of these tailings is essential to minimize environmental risks and comply with regulatory standards.
Eco-friendly tailings management with GEA centrifuge technology
In the mining industry, tailings are the materials left over after the extraction of valuable minerals. These fine-grained slurries often contain harmful substances and require careful handling. GEA sludge Decanters are used to efficiently separate solids from liquids, producing dewatered tailings suitable for safer storage and reducing the volume of waste.
Challenges in tailings management
Traditional tailings storage methods, such as ponds and dams, pose environmental risks, including potential dam failure and groundwater contamination. In addition, these methods require large land areas and can result in significant water loss through evaporation. Regulatory pressures and the need for sustainable practices have made efficient tailings dewatering a priority for mining companies.
Benefits of decanter centrifuges
GEA sludge Decanters provide a compact and continuous solution for tailings dewatering. They operate effectively in confined spaces and can be installed as fixed units or mobile container systems.
Improved water recovery
In mining operations, especially those situated in arid regions where water is scarce, recovering clean process water is essential. Decanter centrifuges from GEA play a key role in this process by reducing the need for fresh water intake and enabling water recycling within the plant. GEA sludge Decanters can achieve dry solids values of 70–80%, making them highly effective in sludge dewatering. By recirculating water back into the mineral processing cycle, they help conserve local water resources, lessen environmental impact, and contribute to more sustainable mining practices.
Consistent performance
GEA sludge Decanters deliver reliable, continuous dewatering performance, operating 24/7 to meet the demands of mining operations. Unlike filter presses, they maintain consistent dewatering rates without filter cloths, ensuring uninterrupted operation and lower maintenance. The dry solids content of dewatered sludge can be precisely adjusted by varying machine parameters, allowing optimal tailoring to specific process needs. Additionally, these decanters require only a very low dosage of polymer – or in some cases, none at all – depending on the type of tailings. This enhances cost-efficiency and significantly reduces chemical use. Built to withstand extreme climates, GEA decanters deliver consistent performance without compromising efficiency or reliability.
Reduced environmental impact
Dewatering tailings enables the storage of dewatered sludge, significantly lowering environmental risks. Sludge dewatering reduces the volume of wastewater in settling ponds and decreases the pressure on dams, minimizing the potential for dam failures and groundwater contamination. This approach enhances the stability of tailings facilities and supports sustainable mining by reducing the environmental footprint of operations.
Open pit mine in Peru
Environmentally friendly tailings management with GEA decanters
GEA sludge Decanters offer an effective solution for modern tailings dewatering challenges, enhancing both environmental stewardship and operational efficiency in mining operations. These centrifuges provide continuous, high-throughput dewatering with minimal maintenance, making them well-suited for the demanding conditions of mining sites. Their compact design facilitates installation in confined spaces, and robust construction ensures reliable performance even in extreme climates. By efficiently separating solids from liquids, GEA sludge Decanters support sustainable mining practices through improved water recovery and reduced environmental impact.
GEA environmental Decanter lines
Safeguarding our resources to protect, feed and power the world.
Insights da GEA
Kytero 10, as grandes mudanças começam pequenas
Com a kytero 10 da GEA, pesquisadores e desenvolvedores das indústrias de biofármacos, alimentícia e de novos alimentos agora contam com a mais recente geração de um poderoso acelerador à sua disposição.
A tecnologia de bomba de calor reduz a emissão de carbono industrial
Da economia de custos à redução de emissões, a GEA lidera projetos inovadores de tecnologia de bomba de calor. Explore iniciativas de aquecimento tradicional e urbano.
No cardápio: ovos mais sustentáveis
A GEA ajuda os clientes a testar e escalonar produtos e ingredientes alternativos ao ovo feitos com fermentação de precisão.
