Add Better
GEA‘s Add Better solutions
Empowering customers with resource-efficient solutions
Aseptic Blower
Compared to its predecessor, the special air recovery system of GEA’s ABF 2.0 uses 31% less energy for bottling. It compresses the air that is needed for blowing process and cap sterilization.
Aseptic Filler
The new water rinsing unit of the GEA EcoSpin2 Zero achieves massive water savings of up to 91% when installed as new machinery and 83% when upgrading the installed base.
Bilge Water Separator
The GEA bilge Separator with integrated direct drive is designed to clean oily water using a high efficiency motor that transfers energy directly to the bowl without belts or clutches, reducing energy consumption by 13%.
Carbon Capture
GEA's integrated Waste Heat Recovery and Carbon Capture solution enables a significant reduction of the overall energy consumption and by that also of CO2 emissions by 11% compared to a stand-alone Carbon Capture solution without Waste Heat Recovery.
Centrifuge Cooling
The GEA Centrifuge Water Saving Unit reduces the cooling water consumption for separators by 100% compared to conventional cooling.
Clean & Pump
The high-performance GEA Hilge NOVATWIN+ saves an average of 13% energy compared to its predecessor model thanks to its higher efficiency with a smaller pump.
Craft Beer Separator
The GEA plug & win i separator skid features a new integrated direct drive which reduces the energy consumption by up to 10% compared to its previous model.
Drum Forming
MaxiClean drum cleaning machine, a dedicated part of the MaxiFormer drum forming system, saves food manufacturers up to 62% of their water consumption when processing formed products compared to previous versions.
We engineer sustainable solutions to support our customers. Learn more about Add Better.
Environmental Decanter
The GEA environmental Decanter pro provides an energy-efficient solution for both municipal and industrial sludge treatment. Depending on the machine size, it offers energy savings of 15 to 60%.
Heat Pump
証明された高性能製品をさらに改良：より高い温度、容量適用範囲の拡張、「クラス内でベストの」効率、より低い総費用、持続可能性を向上 － 新しいGEA RedGenium ヒートポンプはそのすべてを持っています。
Homogenizing Valves
The NanoVALVE improves viscosity and stability in food, dairy, beverage and chemical emulsions, consuming 20% less energy than previous versions.
Homogenizing Valve
The coneVerge® homogenizing valve is suitable for dairy, food and beverage products sensible to homogenization pressure.
Thanks to the innovative design the valve obtains outstanding homogenization performances at Ultra Low Pressure range, allowing energy savings up to 20%.
Marine Separator
The GEA marine Separator with integrated direct drive efficiently purifies fuel and lube oil using a high-efficiency motor that transfers energy directly to the bowl without belts or clutches, reducing energy consumption by 9%.
Membrane Filtration Cleaning
GEA Smart Filtration CIP is a software-based method of operating pumps while cleaning membrane filtration plants in a pulsating way, consuming up to 46% less energy.
Membrane Filtration Flushing
Smart Filtration Flush is a software-based solution designed to reduce water consumption by up to 52% during CIP Flush.
Milk and Whey Separator
The new GEA Advanced Water Supply of the Separator Series MSI enables a process-oriented reduction of cooling and operating water consumption by minimum 48%.
From a single product to entire productions and consulting services. Learn more about Add Better Consulting.
Pretreatment for HVO and SAF
Save up to 50 percent in OPEX and up to 12 percent in CO2 emissions with the new HVO pretreatment process from GEA.
Slow-rotating skimming separators
Dairy separators from the GEA EngySpeed series feature an "oversized" design and operate at a lower bowl Speed - significantly reducing energy requirements by up to 40 % while maintaining the same performance.
Spray Drying
A heat pump solution for spray dryers, AddCool allows milk powder producers to reduce energy consumption by up to 49%.
Spray Dryer Optimization
By applying advanced model-predictive control, GEA OptiPartner improves process stability and capacity utilization in spray drying. This translates to higher productivity and typically 10% lower energy use.
Spiral oven
GEA CookStar業務用スパイラル オーブンです。容量、処理能力、柔軟性、均一性、そして信頼性の点で抜群の性能を誇るGEAの食品加工機械シリーズの一つです。鳥肉、豚肉、牛肉、魚、および代替肉を完璧に調理し、一貫してライバルを凌いでいます。
Rotary Tablet Press | NexGen Press® 30
The GEA NexGen Press® 30 achieves a remarkable 21% reduction in power consumption compared to previous ranges of tablet presses.
Tablet press | CDC
The ConsiGma® DC for direct compression is the latest expansion of GEA's continuous portfolio for cost effective, compact, high yield manufacturing systems. It offers a robust and flexible manufacturing method for a wide range of products.
Thermoforming
GEA PowerHeatは熱成形包装のミッシングピースで、パッケージの品質と機能性を損なうことなく、生産性を最大10%向上させ、エネルギーを最大30%節約し、単層フィルムの使用を可能にします。
Tunnel Oven
The electric oven retrofit kit GEA E-Switch-Bake enables bakeries to switch from high-consumption gas ovens to more sustainable electric options, saving up to 14% of energy.
Valve Control
GEA’s electronic LEFF® function on top-tier T.VIS® A-15 valve control tops can conjure up to 92% reduction in the amount of water and cleaning agent used during valve seat cleaning.
We engineer sustainable solutions to support our customers. Learn more about Add Better.
Manure enricher
GEA’s ProManure E2950 Manure Enricher enables local production of fertilizer using only livestock slurry, air and electricity and thus reducing harmful emissions by up to 27%.
Milking solutions
GEA’s DairyRobot solution for automated milking requires up to 19% less energy than its predecessor.
Milking solutions
DairyRotor T8600は、牛舎はもちろん牧草ベースの酪農経営にも適したパワフルなオールラウンダー。人間工学に基づいた質の高い作業性、定評ある家畜の快適性、先進的なDigiTron搾乳制御装置により、迅速な乳牛の移動とシームレスな搾乳作業を実現します。
Milking solution
最先端の効率性:特に大規模農場を経営する酪農業者向けに開発された GEA DairyRotor T8900 回転搾乳パーラーは、潜在性を生産性に転換することができます。これは、このシステムの極めて柔軟性の高いデザインによるものです。お客様に適したサイズと設備をお選びいただけば、GEA が未来の農場に対するお客様のビジョンを今すぐ実現すべくお手伝いいたします。
