Turn waste stream to process water stream
GEA Condensate Polisher
Condensate from evaporation plants is used as process, cooling, and rinsing water or is directly discharged into a drainage ditch.
For this purpose, the condensate must be purified. Impurities in the condensate can be removed by membrane filtration, in the particular case by reverse osmosis, and high condensate qualities can be achieved.
Condensate from evaporation processes contains impurities such as chemical oxygen demands (COD), ions and other unwanted components. For re-use as process water, these impurities need to be removed. Using reverse osmosis, it is possible to produce a high-grade process water for re-use in the production facility with a low content of ions and a low conductivity level.
The operating pressure and process design depends on the quality of the condensate and the level of purification required.
If the capacity of the system increases, requiring higher volumes of condensate to be treated by a waste water system, the hydraulic load to the waste water system can be reduced up to factor five when installing the Condensate Polisher. The filtrate can be discharged directly if the purity requirements are met.
Benefits of process water recovery:
- High-quality filtrate/permeate from the polisher – purified with a low COD/BOD
- Re-use of filtrate/permeate/regained water in production processes e.g:
- CIP flush water (including final flush)
- CIP water (chemical priming)
- Water source closed sections (PHE etc.)
- Water for hose stations
- Pump seal water
- Process water (if UV or treated similar)
- Boiler water (special application)
- Reduction of fresh or well water consumption – up to 90% of recovery of water via polisher
- Reduction of waste-water by reusing the water from polisher
Downloads
Related Products
Custom-Designed Filtration Plants
GEA custom designs membrane filtration systems that best utilize the technologies of microfiltration, ultrafiltration, nanofiltration, or reverse osmosis for each customer's specific application.
Beer Recovery Unit
GEA cross-flow filtration with robust ceramic membranes are used for the effective recovery of beer from tank bottoms. Modular plants are supplied on compact skids in three standard sizes with processing capacities of approximately 250 hl, 500 hl and 1000 hl per day depending on the dry solids content of the product.
GEA AromaPlus Membrane Dealcoholization Unit
Supporting small to large feed rates, and configurable for both batch and continuous processes, the dedicated AromaPlus system is built on our reverse osmosis (RO) membrane filtration technology.
Membrane Unit to Produce FAB
GEA’s cross-flow membrane filtration units have been specifically designed to deliver a clear, colorless, tasteless and aroma-free neutral alcoholic base. The neutral alcohol base used in a hard seltzer derives from a fermentation process with no distillation step.
GEA Insights
Heat pumps fast-track district heating decarbonization
The impact of global warming is increasingly apparent all over the world. Towns and cities everywhere face the same challenge: providing their communities with reliable, affordable, sustainably sourced heat. GEA spoke with an expert in the field, Kenneth Hoffmann, Manager, Heat Pumps at GEA Heating & Refrigeration Technologies, about tackling global warming faster.
Living the digital future of dairy farming with GEA
Something caught Farmer Tom's eye. Instead of another product demo, GEA showcased innovations via AR. That's only the start of GEA's interactive digital farm.
GEA homogenizers power bioinks for regenerative medicine
GEA scientists are working with researchers at the Graz University of Technology to configure a homogenization process and technology that turns eucalyptus pulp into 3D-printed, organic structures mimicking human veins, arteries and other tissues.
