GEA Aquarius FlexFormer XHC
Are you ready to bring your lollipop production into the future?
Easy change overs
The FlexFormer XHC doesn’t just offer increased speed and flexibility – it’s also our most efficient, reliable lollipop former yet, keeping you running for longer. Change over times are limited to approximately just 1,5 hours thanks to the new easy change tools, and a turnable stick hopper facilitates easier access to sticks and smooth flows within 5-10 minutes.
Higher outputs – fewer cleaning cycles
The FlexFormer XHC’s polished forming set ensures reduced cleaning cycles, less water usage when running Clean In Place (CIP) and longer production runs per day, depending on your production circumstances. CIP substantially reduces downtime and labour costs, with only 20-30 minutes cleaning after each production run.
Efficient continuous operation
With the FlexFormer XHC’s automatic lubrication system, we ensure an efficient and continuous operation, with less wear and tear due to lubrication on the forming set flaps, and lubrication of the stamp shaft and press bridge via PLC control.
Ball lollipop
Characteristics
- Easy access and easy maintenance thanks to turnable stick hopper
- Consistent high quality of produced lollipops
- Very flexible, quick change over between sizes, within 1,5 hour
- CIP unit, automatic cleaning within 0,5 hour
- Efficient continuous operation, less downtime due to automatic lubrication system
- Extensive damage protection package
Extensive machine protection
Our machine protection system ensures no damage to the parts during a standard production run, with temperature monitoring of the forming set and motor consumption, as well as an automatic-stop pressure gauge.
Performance values
- High output up to 2770 lollipops per minute
- Less operating costs
- Flexible production (easy change tool to exchange forming set)
Technical details
| Technical data | FlexFormer XHC |
| Output (max) | 2770 lollipops/ min |
| Dimensions (H x W x D) case | 210 x 210 x 220 cm |
| Diameter/ width lollipop (min to max) | 20 - 35 mm |
| Minimum rim | 2,9 mm |
| Weight lollipop | 4,8 gr - 39,4 gr |
| Diameter stick | 3,2 - 5,5 mm |
| Stick length | 75 - 102 mm |
| Tolerance diameter stick | 0,1 mm |
Downloads
Related Products
GEA Aquarius FlexFormer Start Up
A perfectly formed lollipop with an excellent taste and mouth feel are the ingredients to success. These Benefits are within reach when forming with a GEA Aquarius FlexFormer. Whatever shape you would like to make, whether ball, flat or three-dimensional, GEA Aquarius has with the
FlexFormer range the right machine for the job. Configured to appe...
GEA Aquarius FlexFormWrap
A perfectly formed three dimensional lollipop with an excellent taste and mouth feel are the ingredients to success. These benefits are within reach when forming with a GEA Aquarius FlexFormWrapper. GEA Aquarius has with the FlexFormer range the right machine for the job. After forming, the lollipops will be immediately wrapped in a beautiful sa...
GEA Aquarius FlexFormer
A perfectly formed lollipop with an excellent taste and mouth feel are the ingredients to success. These benefits are within reach when forming with a GEA Aquarius FlexFormer. Whatever shape you would like to make, whether ball, flat or three-dimensional, GEA Aquarius has with the FlexFormer range the right machine for the job.
Related Videos
Elevate your production with the GEA Aquarius FlexFormer
Productivity meets eco-friendliness with the GEA Aquarius FlexFormer
Shape your imagination with GEA Aquarius lollipop forming equipment
GEA Insights
Heat pumps fast-track district heating decarbonization
The impact of global warming is increasingly apparent all over the world. Towns and cities everywhere face the same challenge: providing their communities with reliable, affordable, sustainably sourced heat. GEA spoke with an expert in the field, Kenneth Hoffmann, Manager, Heat Pumps at GEA Heating & Refrigeration Technologies, about tackling global warming faster.
Living the digital future of dairy farming with GEA
Something caught Farmer Tom's eye. Instead of another product demo, GEA showcased innovations via AR. That's only the start of GEA's interactive digital farm.
GEA homogenizers power bioinks for regenerative medicine
GEA scientists are working with researchers at the Graz University of Technology to configure a homogenization process and technology that turns eucalyptus pulp into 3D-printed, organic structures mimicking human veins, arteries and other tissues.
