GEA Hilge TPS
Single-Stage Self-Priming Centrifugal Pumps for Standard Applications
By combining the existing centrifugal pumps series GEA Hilge TP with a front rotor, a new generation of hygienic self-priming centrifugal pumps has been created.
The centrifugal pump GEA Hilge TPS is a self-priming pump for viscosities of up to 500 mPas. The TPS is characterized by a low sound level, highest efficiency and excellent cleaning properties. The GEA Hilge TPS series also permits evacuation of pipes on the suction side – so that just one pump is required for CIP return and product conveying!
Applications
The GEA Hilge TPS series has been designed for a variety of applications within:
- Beer
- Wort
- Yeast
- Water
- CIP Solutions
- Milk
- Cream
- Yoghurt
- Whey
- Brine
- CIP Solutions
- Oils
- Sauces
- Stock
- Brine
- Flavors
- Ice-cream mix
- CIP Solutions
Application Options GEA Hilge TPS
- CIP solutions
- Tank emptying
- Gas conveying
Technical Benefits
- Operating pressure max. 16 bar
- Low NPSH value avoids early cavitation to the pump
- Energy-efficient operation thanks to optimized speed control and/or impeller trimming
Constructive Characteristics
- Open impeller design optimized for gentle product handling
- Wetted components made of 1.4404 or 1.4409 (AISI 316L)
- Surface roughnesses of Ra = 0.8 µm can be achieved by mechanical treatment of the surface (higher surface qualities on request)
- High-efficiency IE3 motors
Special Characteristics
- Gentle product handling
- Standard connection: DIN 11853-2 Hygienic groove flange
- Low wear part stock requirement thanks to modular concept
- Acceptance test certification 3.1 (optional)
- EHEDG certified
- Sealings comply to FDA and USP Class IV
Mechanical seal optimized for hygienic applications
- Mechanical seal unit can be removed from the front
- Flushing unit easy to retrofit
- Pump shaft protected by wear sleeve
- Only two mechanical seal sizes for the entire pump series
- Seal face material options: carbon/silicon carbide (standard), silicon carbide/silicon carbide
- Various elastomers with FDA approval (EPDM, FKM)
Sealing of GEA Hilge TPS centrifugal pumps according to EHEDG standards
The elastomer sealing is executed according to EHEDG standards. The special groove enables the seal is kept reliably in place at all times. The shape of the groove is based on FEM analyses. The metallic stop allows a defined compression of the seal, ensuring gap-free sealing against the product chamber without dead corners.
Technical data
Technical data| GEA Hilge TPS | 50 Hz | 60 Hz |
| Flow | 100 m³/h | 120 m³/h |
| Head | 90 m | 100 m |
| Media temperature | 140 °C | |
| Operating pressure | 16 bar | |
Performance curves
Related Videos
GEA Hilge TP/TPS Hygienic Pump Animation
