Reciprocating Compressors
GEA Grasso V XHP
The GEA Grasso V XHP compressors, that use natural refrigerants such as ammonia, are designed to minimize their environmental impact. With the ability to reach water temperatures of up to 95°C / 203°F and offering best-in-class efficiency, they are an ideal choice for heat pump systems.
Sustainability
The V series is designed to use the natural refrigerant ammonia (R717) to achieve the highest efficiency. It can be used for heating and cooling applications, and can achieve hot water temperatures of up to 95°C / 203°F.
Reliability
The use of high-end materials and proven technology helps to ensure max. reliability. In addition to the standard benefits of the V series, a unique drain system and continuous safety monitoring are integrated in the design.
Service
The electronically measured flexible and extended service intervals, minimize maintenance costs during the long service life of these compressors.
Efficiency
A unique welded compressor housing minimizes thermal losses due to excellent suction and discharge separation. Optimized gas flow within the compressor results in high efficiency and very low oil carryover.
Looking for the most efficient reciprocating compressor?
GEA RedGenium
GEA Grasso V XHP, a proven high-efficiency reciprocating compressor, is also available for high-temperature heat pump applications, particularly for use with the GEA RedGenium heat pump.
The GEA Grasso V XHP series can achieve water temperatures of up to 95°C / 203°F with a maximum design pressure of 63 bar(g) / 913.7 psi and offers a wide capacity range up to 2.300 kW. This makes this model the first choice for hot-water applications to meet industrial requirements for food & beverage, district heating, and other applications.
相关视频
GEA Grasso V series reciprocating compressor
GEA RedGenium Heat Pump On the Move
GEA RedGenium now up to 95°C/203°F
Downloads
GEA 洞察
Fueling the circular economy in shipping
Ports now compete not just on logistics, but on sustainability. At Greece’s Piraeus port, an advanced processing and recovery facility recycles ship waste oil into fuel. Equipped with GEA’s high-performance centrifuges, it sets a new benchmark for state-of-the-art, environmentally responsible port operations.
GEA Grasso V XHP系列继承了 V 系列通过更低的功耗和最高的可靠性使得客户能更低运营成本(TCO)的特性。特别是在以氨作为制冷剂的热泵应用中，也得到了充分的体现。
GEA Grasso V XHP 系列压缩机可以满足客户在较大制热量范围下，并提供最高95 °C 热水水温的要求。最高63Bar的设计压力，使得该系列成为温度 95°C 氨热泵应用的首选，可满足食品工业和其他领域的工业要求，尤其是清洗和加工方面的特殊要求。
V XHP 系列目前含有4、6、8 和 10 缸四种不同的机型。V XHP 压缩机是 GEA RedGenium 机组的核心部件，客户也可以直接选择GEA RedGenium 机组。
最先进的彩色触摸屏 GEA Omni 控制柜通过简单丰富的操作界面以及GEA专门的控制程序，使得客户在现场可以通过最简动作来实现高效操作。
简而言之，新V XHP系列继承了 V 系列高效率和高可靠性的DNA，但它更青出于蓝！
特点和技术特征
- 安全：采用多级安全链防止过压。
- 特殊设计：特殊的热泵应用设计和组件，可提供行业领先的 GEA Omni 控制柜。
- 可持续发展：天然制冷剂 氨，GWP为零。
- 可靠性：新型高压压缩机继承原有低压型号的高效、高可靠性特性，并融入GEA长期热泵应用经验。
- 性能：在 35 °C 和 95 °C 的条件下，V XHP系列10缸压缩机最大制热量约为 2300 Kw。
| 参数 | GEA Grasso V XHP |
| 型号 | V 350XHP、V 550XHP、V 750XHP、V 950XHP |
| 制冷剂 | R717/氨 |
| 制热量 35/95 度 | 约 700 to 2300 Kw |
| 吸气压力范围 | -15 °C / +60 °C |
| 最大排放压力 | 水，Tc= +98 °C，在 +95 °C 条件下 |
| 最小/最大转速 | 500 / 1500 rpm |
| 全负荷 1500rpm 时的总工作容积 | 376 至 941 m3/hr |
| 设计吸气压力 | 30bar |
| 设计排气压力 | 63bar |
| 设计压差 | 50bar |
| 油泵 | 外置 |
| 控制柜 | GEA Omni |
