Add Better

GEA‘s Add Better solutions

Empowering customers with resource-efficient solutions

Add Better – Resource-efficient solutions from GEA

Aseptic Blower

Compared to its predecessor, the special air recovery system of GEA’s ABF 2.0 uses 31% less energy for bottling. It compresses the air that is needed for blowing process and cap sterilization.

Aseptic Filler

The new water rinsing unit of the GEA EcoSpin2 Zero achieves massive water savings of up to 91% when installed as new machinery and 83% when upgrading the installed base.

Bilge Water Separator

The GEA bilge Separator with integrated direct drive is designed to clean oily water using a high efficiency motor that transfers energy directly to the bowl without belts or clutches, reducing energy consumption by 13%.

Carbon Capture

GEA's integrated Waste Heat Recovery and Carbon Capture solution enables a significant reduction of the overall energy consumption and by that also of CO2 emissions by 11% compared to a stand-alone Carbon Capture solution without Waste Heat Recovery.

Centrifuge Cooling

The GEA Centrifuge Water Saving Unit reduces the cooling water consumption for separators by 100% compared to conventional cooling.

Clean & Pump

The high-performance GEA Hilge NOVATWIN+ saves an average of 13% energy compared to its predecessor model thanks to its higher efficiency with a smaller pump.

Craft Beer Separator

The GEA plug & win i separator skid features a new integrated direct drive which reduces the energy consumption by up to 10% compared to its previous model.

Drum Forming

MaxiClean drum cleaning machine, a dedicated part of the MaxiFormer drum forming system, saves food manufacturers up to 62% of their water consumption when processing formed products compared to previous versions.

We engineer sustainable solutions to support our customers. Learn more about Add Better.

Environmental Decanter

The GEA environmental Decanter pro provides an energy-efficient solution for both municipal and industrial sludge treatment. Depending on the machine size, it offers energy savings of 15 to 60%.

Heat Pump

Performansını kanıtladı, şimdi daha da iyi: Yüksek sıcaklıklar, arttırılmış kapasite yelpazesi, sınıfının en iyisi verimlilikler, düşük toplam maliyet ile daha fazla sürdürülebilirlik - yeni GEA RedGenium ısı pompası bunların hepsine sahip.

Homogenizing Valves

The NanoVALVE improves viscosity and stability in food, dairy, beverage and chemical emulsions, consuming 20% less energy than previous versions.

Homogenizing Valve

The coneVerge® homogenizing valve is suitable for dairy, food and beverage products sensible to homogenization pressure.
Thanks to the innovative design the valve obtains outstanding homogenization performances at Ultra Low Pressure range, allowing energy savings up to 20%.

Marine Separator

The GEA marine Separator with integrated direct drive efficiently purifies fuel and lube oil using a high-efficiency motor that transfers energy directly to the bowl without belts or clutches, reducing energy consumption by 9%.

Membrane Filtration Cleaning

GEA Smart Filtration CIP is a software-based method of operating pumps while cleaning membrane filtration plants in a pulsating way, consuming up to 46% less energy.

Membrane Filtration Flushing

Smart Filtration Flush is a software-based solution designed to reduce water consumption by up to 52% during CIP Flush.

Milk and Whey Separator

The new GEA Advanced Water Supply of the Separator Series MSI enables a process-oriented reduction of cooling and operating water consumption by minimum 48%.

From a single product to entire productions and consulting services. Learn more about Add Better Consulting.

Pretreatment for HVO and SAF

Save up to 50 percent in OPEX and up to 12 percent in CO2 emissions with the new HVO pretreatment process from GEA.

Slow-rotating skimming separators

Dairy separators from the GEA EngySpeed series feature an "oversized" design and operate at a lower bowl Speed - significantly reducing energy requirements by up to 40 % while maintaining the same performance.

Spray Drying

A heat pump solution for spray dryers, AddCool allows milk powder producers to reduce energy consumption by up to 49%.

Spray Dryer Optimization

By applying advanced model-predictive control, GEA OptiPartner improves process stability and capacity utilization in spray drying. This translates to higher productivity and typically 10% lower energy use.

Spiral oven

The GEA CookStar industrial spiral oven. One of a family from GEA with excellent performance in terms of capacity, throughput, flexibility, consistency and reliability. Perfectly cooks poultry, pork, beef, fish or meat replacement products, consistently outperforming its rivals.

Rotary Tablet Press | NexGen Press® 30

The GEA NexGen Press® 30 achieves a remarkable 21% reduction in power consumption compared to previous ranges of tablet presses.

Tablet press | CDC

The ConsiGma® DC for direct compression is the latest expansion of GEA's continuous portfolio for cost effective, compact, high yield manufacturing systems. It offers a robust and flexible manufacturing method for a wide range of products.

Thermoforming

GEA PowerHeat: Termoform Paketlemedeki eksik parça: verimliliği ’a kadar artırır, enerjiden 0’a kadar tasarruf sağlar ve paket kalitesi ve işlevselliğinden ödün vermeden tek katmanlı filmlerin kullanılmasına imkan tanır.

Tunnel oven E-Bake G2

GEA introduces the E-Bake G2, a new electric industrial baking oven designed to deliver enhanced energy efficiency and improved process control. Developed to meet the evolving demands of sustainable food manufacturing, the E-Bake G2 represents a significant step forward in the transition away from legacy gas-based systems.

Tunnel Oven E-Switch-Bake

The electric oven retrofit kit GEA E-Switch-Bake enables bakeries to switch from high-consumption gas ovens to more sustainable electric options, saving up to 14% of energy.

Valve Control

GEA’s electronic LEFF® function on top-tier T.VIS® A-15 valve control tops can conjure up to 92% reduction in the amount of water and cleaning agent used during valve seat cleaning.

We engineer sustainable solutions to support our customers. Learn more about Add Better.

Feeding system

Get to know the GEA Feeding Robot and optimize milk production, animal health, save time and reduce workload.

Milking solution

Eşsiz tasarımda yüksek performans: Harika süt sağım performansının, konforun ve sağlamlığın keyfini çıkartın

Milking solutions

GEA’s DairyRobot solution for automated milking requires up to 19% less energy than its predecessor.

Milking solutions

DairyRotor T8600, hem ahır hem de mera-bazlı çiftçiliğe uygun, güçlü ve çok-yönlü sistemimizdir. Üstün çalışma ergonomisi, kabul görmüş hayvan konforu ve gelişmiş DigiTron süt sağımı kontrol üniteleriyle, hızlı inek geçişleri ve sorunsuz çalışma sağlar.

Haberleri GEA’dan alın

GEA haber bültenine abone olarak GEA yeniliklerinden ve hikayelerinden haberdar olun.

Bizimle iletişime geçin

Size yardımcı olmak için buradayız! Sadece bir kaç detay ile sorunuza yanıt verebileceğiz.