Single-seat Valves T-smart Divert Valve 2000

With T-smart, GEA offers a valve concept with basic functions, designed for economical processes. For T-smart a deliberate decision was made not to offer a large number of options – for the benefit of the user. T-smart, of course, still provides all the variants and equipment options (e.g. housing combinations, various sealing materials, feedback systems) required by the process.

The T-smart product label stands for

  • Standardized valve concept
  • Small and compact design
  • New standards with regard to ease of use and maintenance
  • Proven GEA quality and process reliability
  • High cost-effectiveness of production

The design - small and compact

T-smart seat valves are characterized by their extremely compact design. The resulting low weight enables easy handling especially for servicing work. Other advantages of this design only become obvious at “second glance”:

  • Balanced valve disks prevent undesirable water hammers, especially if the direction of flow is reversed (valve is closed in direction of flow), thus further improving process reliability.
  • Actuator systems kept short to minimize air consumption and reduce operating costs
T-smart Divert Valve 2000
DN 25 – DN 100
OD 1“ - OD 4“


  • Design which enable gentle handling of the product
  • Conformity with all hygienic requirements
  • Full CIP/SIP capability
  • Unparalleled ease of maintenance

T-smart Divert Valves 2000 are used for converging media from two pipes into one pipe. T-smart divert valves are fitted with single-acting pneumatic actuators type NC (normally closed), alternatively type NO (normally open), and are available in 2 different housing combinations (2017 and 2027 connections).

T-smart Divert Valve 2000

Please refer to the catalog for more information.

Technical Data
Material in contact with the productAISI 316L
Material not in contact with the productAISI 304
Seal material in contact with the productEPDM
Ambient temperature0 - +45°C
Control air pressureMin. 6 bar, max. 8 bar
Product pressure: 
DN 25/ DN 40/ DN 50 / DN 65
OD 1" / 1,5" / 2" / 2,5" / 3"
DN 80/ DN 100 / OD 4" 

max. 6 bar

 max. 5 bar
Product pressure: 
DN 80 - DN 100
OD 4"

 max. 5 bar (normally closed /
max. 6 bar (normally open) 

Surface in contact with the productRa ≤ 0.8 μm
External housing surfaceMetal blank
Actuator typePneumatic actuator air/spring; not reversible 
Connection fittingsWelding end