Single-seat Valves T-smart Shut-off Valve 1000

With T-smart, GEA offers a valve concept with basic functions, designed for economical processes. For T-smart a deliberate decision was made not to offer a large number of options – for the benefit of the user. T-smart, of course, still provides all the variants and equipment options (e.g. housing combinations, various sealing materials, feedback systems) required by the process. Shut-off Valves, series T-smart are EHEDG certified.

The T-smart product label stands for

  • Standardized valve concept
  • Small and compact design
  • New standards with regard to ease of use and maintenance
  • Proven GEA quality and process reliability
  • High cost-effectiveness of production

The design - small and compact

T-smart seat valves are characterized by their extremely compact design. The resulting low weight enables easy handling especially for servicing work. Other advantages of this design only become obvious at “second glance”:

  • Balanced valve disks prevent undesirable water hammers, especially if the direction of flow is reversed (valve is closed in direction of flow), thus further improving process reliability.
  • Actuator systems kept short to minimize air consumption and reduce operating costs


  • Design which enable gentle handling of the product, 
  • Conformity with all hygienic requirements, EHEDG certified
  • Full CIP/SIP capability
  • Unparalleled ease of maintenance 

T-smart Shut-off Valve 1000
DN 25 – DN 100
OD 1“ - OD 4“

T-smart shut-off valves are used for simple shut-off functions in pipe systems. They have single-acting pneumatic actuators type NC (normally closed), alternatively type NO (normally open), and are available in 2 different housing combinations.

Technical Data
Material in contact with the productAISI 316L
Material not in contact with the productAISI 304 
Seal material in contact with the productEPDM
Ambient temperature0 - +45°C
Control air pressureMin. 6 bar, max. 8 bar
Product pressure
DN 25/ DN 40/ DN 50 / DN 65
OD 1" / 1,5" / 2" / 2,5" / 3"
DN 80/ DN 100 / OD 4"
normally closed
max. 6 bar

 max. 5 bar
Product pressure
DN 25/ DN40/ DN 50 / DN65 
OD 1" / 1,5" / 2" / 2,5" / 3"
DN 80/ DN 100 /  OD 4"
normally open
 max. 6 bar

 max. 6 bar
Surface in contact with the productRa ≤ 0.8 μm
External housing surfaceMetal blank
Actuator typePneumatic actuator air/spring; not reversible 
Connection fittingsWelding end
CertificatesEHEDG, CE