GEA Hilge MAXA
Single-Stage End-Suction Centrifugal Pumps for Advanced Applications
GEA Hilge MAXA CN with flange connection and IEC motor on base plate
High Quality Throughout
The GEA Hilge MAXA range is made from deep-drawn, rolled stainless steel in AISI 316L (1.4404). Flexible mounting options are available, such as a close-coupled pump, a close-coupled pump with bearing bracket or a base plate pump version (with motors up to 160 kW). The GEA Hilge MAXA range employs closed impellers with optimized efficiency and NPSH. Flange or thread connections according to ANSI or DIN standards are available.
For some GEA Hilge MAXA pump sizes, an inducer for NPSH improvements is available as an option, also a channel impeller for pumping media with high solids content.
Shaft Seals – Choose the One to Suit You
A wide range of shaft seal options is available to suit different media and applications. The mechanical seals used in the GEA Hilge MAXA range conform to DIN 24960. The single inboard seals maintain the optimum position in the liquid. This ensures efficient cleaning, lubrication and cooling.
Certificates and Documents
- Work certificates, e.g. acc. to DIN EN 10204, 2.2 or 3.1
- FDA and EHEDG certificates
- Surface roughness measurement
Seal Options
- Double mechanical seals in tandem design
- Double mechanical seals in back-to-back design
- Cartridge sealing systems (upon request)
A Wide Variety of Applications
The highly reliable GEA Hilge MAXA pumps are suitable for:
Food & Beverage
- Breweries – gentle pumping of mash and wort along with beer filtration
- Dairy
- Food processing
- CIP systems
Industrial Applications
- Water treatment plants
- Chemical handling
- Liquids with high contents of solids
- Bio fuels
Design variants
Design variants - GEA Hilge MAXA| Standard variants | Description |
| GEA Hilge MAXA Bloc | Close-coupled pump, horizontal installation |
| GEA Hilge MAXA L | Close-coupled pump with bearing bracket, horizontal installation |
| GEA Hilge MAXA Adapta | Close-coupled pump with bearing bracket and coupling, horizontal installation |
| GEA Hilge MAXA CN | Bearing bracket pump mounted on base plate, horizontal installation |
Technical data
Technical data| GEA Hilge MAXA | |
| Flow | up to 1,400 m³/h |
| Head | up to 100 m |
| Operating pressure | 10 bar |
| Liquid temperature | 95 °C
(150 °C upon request) |
Performance curves
Downloads
Related Products
GEA Hilge HYGIA
The swiss knife among Hygienic Pumps. The GEA Hilge HYGIA series consists of single-stage end-suction centrifugal pumps, designed for the use in industries with high demands to hygiene and flexibility.
GEA Hilge HYGIA H
The high-pressure version of the proven HYGIA series for the dairy, food and beverage industry.
GEA Hilge CONTRA
The GEA Hilge CONTRA pump series includes single- and multi-stage end-suction centrifugal pumps designed according to Qualified Hygienic Designs (QHD) criteria for certified safety and maximum adaptation options to demanding processes.
GEA Hilge NOVALOBE
Revolutionary Design for Viscous Media - The GEA Hilge NOVALOBE range is specifically designed for viscous media – and for applications where gentle pumping or dosing is required.
