Aseptomag® valve line Leakage Valves Aseptomag® LV

Aseptomag® leakage valves are used for the mixproof shut-off of incompatible products at pipe junctions in UltraClean processing plants.

The valve design is characterized by the sealing of the moving valve stems with stainless steel bellows and the leakage chamber which is open to atmosphere. Due to these two characteristics, the valve enables a simplified process compared to true aseptic installations but still provides enhanced product safety by having hermetically sealed valve stems. Therefore, this valve is ideal for UltraClean applications within the food, beverage and dairy industry.

Main Components

Housing for leakage valves are available with two, three, or four connection ports. The valves are produced with butt-weld connections by default. Mixed port connection sizes as well as various aseptic pipe connections are available upon request.

Internal Assembly
The internal assembly is equipped with a hard PTFE seal for the axial, and an EPDM seal for the radial valve seat by default. In addition to the standard sealing material, Tefasep® is optionally available for the axial valve seat seal.

The pneumatic actuator for the leakage valves LV is made of stainless steel and designed to be spring-closing/air-opening (NC). In addition to the full stroke, the standard design also allows the lifting of the radial valve seat seal.

Due to its solid construction, the GEA Aseptomag® clamp enables a pressure stable and safe connection of the main components. The special design with three segments allows a service-friendly handling of the component, even under tight space conditions. 

Feedback units
UltraClean leakage valves can be either equipped with open feedback units or T.VIS® feedback systems by default. Feedback units from third party suppliers can be mounted via special adaptors.  


Technical Data of standard execution

Nominal pressure valve10 bar
Closing pressure5 -6 bar (depending on valve size)
Control air pressure6 bar
Hermetic sealing elementStainless steel bellows
Valve seat seal materialPTFE/EPDM
Housing sealSilicone
Surface quality in product areaRa ≤ 0.8
Material quality in product areaAISI 316L / AISI 316Ti
Max. operating temperature135 °C (275 °F)
Max. sterilization temperature150 °C (302 °F) for max. 30 min.

For further information about the application of this valve type please refer to the tab Aseptomag® valve line.

Aseptomag® Valve Technology

Aseptomag® aseptic valves are designed to meet the highest demands for aseptic processes in the dairy, food and beverage industry.

Aseptic bellows valves distinguish themselves with the uncompromisingly hermetic seal of the valve stem, thereby minimizing contamination risks and maximizing detection possibilities. The Aseptomag® valve line is the equivalent for aseptic processes to the hygienic VARIVENT® valve line and provides everything from shut-off and bottom-seat to mixproof and sampling valves. The valves meet the highest hygienic standards required, such as EHEDG and 3-A standards. Thanks to the modular structure, the Aseptomag® valve line also allows tailor-made valve solutions for specific process requirements (higher closing pressures, special materials, special design, etc). Aseptomag® valves can be equipped with T.VIS® control tops and can therewith seamlessly be integrated into an automated process plant.

UltraClean Applications

The most relevant product parameter for UltraClean applications is shelf-life. It is mostly determined by the pH-value and the aw-value of the product. In addition, sensory properties need to be considered as well as the logistical chain of distribution. One of the advantages of UltraClean processing is the reduced quantity of preservatives needed for maintaining the shelf-life of the product.

Application examples

  • Brewery industry – Beer and mixed beer beverages (e.g. pure yeast cultivation and connection of sterile tanks and filling machines after sterilization)
  • Beverage industry – Water-based mixed beverages (e.g. soft drinks, fruit juice and fruit-based beverages, concentrates, beverages with pulp)
  • Dairy industry – Milk-based and lactic acid-fermented products (e.g. ESL milk, dessert products, crystallizing products such as lactose)
  • Food and beverage industry – Sauces and delicacies (e.g. manufacture of basic fruit ingredients, incl. particulates such as nuts)

Aseptomag LV/DT at a Glance

  • Hermetic sealing by stainless steel bellow
  • Uncompromising detection possibilities
  • Easy and safe maintenance
  • Ideal fit for UltraClean mixproof applications

Sizes *

Valve typeMetricInch OD
Shut-off Valves Aseptomag® AVDN 15 – DN 1500.75” – 6”
Shut-off Valves Aseptomag® AVBSDN 15 – DN 1500.75” – 6”
Divert Valves Aseptomag® UVDN 15 – DN 1000.75” – 4”
Shut-off Valves Aseptomag® AFDN 25 – DN 1001” – 4”
Control Valves Aseptomag® RVDN 15 – DN 1000.75” – 4”
Control Valves Aseptomag® RVINDN 25 – DN 651“ – 2.5“
Back-pressure Valves Aseptomag® GDDN 15 – DN 1500.75” – 6”
Shut-off Valves Aseptomag® AMVDN 06 – DN 100.25” – 0.5”
Leakage Valves Aseptomag® LVDN 40 – DN 1001.5“ – 4“
Leakage Valves Aseptomag® DTDN 40 – DN 1001.5“ – 4“
Leakage Valves Aseptomag® ADVDN 25 – DN 1001” – 4”
Double-chamber Valves Aseptomag® DKDN 25 – DN 1501” – 6”
Double-chamber Valves Aseptomag® DKBSDN 25 – DN 1501” – 6”
Double-chamber Valves Aseptomag® DDKDN 25 – DN 1501” – 6”
Double-chamber Valves Aseptomag® AXVDN 25 – DN 1501” – 6”
Sampling Valves Aseptomag® PVDN 10 – DN 150.5” – 0.75”
Steam inlet valves Aseptomag® DEDN 25 – DN 401” – 1.5”
* Additional valve sizes and connection standards (i.e. ISO) available upon request