Vacuum Technology
Product Driven Steam Jet Vacuum Systems are based on proven jet pump technology and often used if the product vapor is used as the motive medium for the jet pumps or if it is essential that no water enters the system.
Jet vacuum systems are used to create and maintain the vacuum in production plants for Polyester and Nylon.
Jet vacuum pumps are generally driven by water vapor. Water vapor is easily obtained in industry and has proved itself as a good motive medium. When the motive steam in the jet vacuum pump condenses, condensate is produced which in some cases must be regarded as waste.
This can be avoided if the product vapor which is produced during the process, is used as the motive medium for the jet pumps. The motive steam condensate is then either put to further use in the process or is re-evaporated and is used again as the motive medium. Product vapor driven jet pumps are also used if it is essential that no water enters the system.
Product vapor driven jet vacuum pumps do not differ in their functioning from water vapor driven jet vacuum pumps and therefore offer the same fundamental advantages. In addition, the energy requirement is in part substantially lower than is the case with water vapor driven jet vacuum pumps because of the low evaporation heat of organic vapors.
石墨多级蒸汽喷射真空泵,适用于腐蚀性应用。
可调流量喷射器基于成熟的 GEA 喷射泵技术,通常用于热回收。
Steam jet ventilators are based on proven jet pump technology and often used to convey air, gases and vapors.
Steam jet compressors type bv1 are based on proven jet pump technology and often used used in evaporating, distillation, cooling, crystallization, deodorization, degassing and drying under vacuum.