GEA provides two meVap® Distillation solutions: Secondary circuit compression for steam reuse, and direct alcohol compression for direct heating.
GEA meVap® Distillation icon
Thermal separation processes, such as evaporation and distillation, are energy intensive. In the course of their development, the aim of efficiently using this energy and of reducing costs first led to single-effect plants heated by live steam, then to multiple-effect plants, then to thermal vapor recompression, and finally, to the use of mechanical vapor recompression systems.
In conventional distillation plants, the energy content of the vapor stream produced is lost to a large extent or is only partially reused. In comparison, mechanical vapor recompression allows the continuous recycling of this energy stream by recompressing the vapor to a higher pressure and therefore, a higher temperature. The compressed vapor can be used to heat the reboiler of the column. Instead of live steam, electric energy is used indirectly to heat the plant.
How does GEA support energy-efficient distillation?
GEA meVap® Distillation can be integrated into diverse process configurations, supporting customers in:
- Optimizing their energy consumption with process-design options focused on energy use, heat integration and utility requirements.
- Reusing process heat for internal steam demands
- Improvingplant energy performance through heat integration
By electrifying part of the heating duty and recovering process heat, GEA meVap® Distillation can contribute to lower site-related energy demand when suitable electricity sources and process conditions are available.
How does the meVap® Distillation work?
GEA’s meVap® distillation is designed specifically for primary or secondary circuit compression for steam reuse.
An electrically driven compressor draws in the steam and increases its pressure and temperature in a single or multi-stage configuration. This raises the steam to a higher energy level, enabling it to be used directly as a heating medium.
Depending on the operating conditions of the plant, a small quantity of additional steam or the condensation of a small quantity of excess vapor may be required to maintain the overall heat balance and to ensure stable operating conditions, especially during start-up.
Due to their simplicity and maintenance-friendly design, single stage centrifugal fans (supplied as high-pressure fans) are used in distillation plants. They operate at high flow velocities and are therefore suited for large flow rates at vapor compression ratios of 1:1.2 to 1:2. Rotational speeds typically ranges from 3,000 up to 12,000 rpm. For high pressure increases, multiple fans can be used.
Left: meVap® Distillation plant with head vapor compression; Right: meVap® Distillation plant with closed heat cycle
Downloads
Смежные продукты
GEA meVap® Compression
GEA meVap® Compression supports the electrification of industrial steam generation by using recovered process.
GEA meVap® Crystallization
GEA meVap® Crystallization works efficiently across various crystallization setups—even in saline or corrosive environments.
GEA meVap® Evaporation
GEA meVap® Evaporation is designed for operational reliability and process performance in a wide range of industrial environments.
Аналитика GEA
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Не только оборудование: повышение эффективности работы предприятия
Эффективное оборудование не является автоматической гарантией эффективности всего предприятия. Реальные улучшения часто начинаются с того, что мы перестаем ограничиваться рассмотрением отдельных единиц оборудования и начинаем вникать в то, как технологические процессы, энергетические системы и эксплуатационные решения влияют друг на друга. Этот комплексный подход позволяет выявить возможности, которые в противном случае могли бы остаться незамеченными.
Как клапан меняет подход к производству продуктов питания и напитков
На предприятиях по производству продуктов питания и напитков клапаны, как правило, приводятся в действие с помощью сжатого воздуха. GEA Hydract® Actuation Technology обеспечивает привод клапанов с помощью воды в замкнутом контуре с цифровым управлением. Результатом стал клапан, который можно точно зафиксировать в нужном положении и регулировать с высокой точностью. Это обеспечивает снижение энергопотребления и повышение уровня контроля.
