GEA RedGenium (North America)
The most efficient solution for heating temperatures up to 203 °F / 95 °C
The GEA RedGenium is a compact heat pump for small to medium heat loads. At its heart are now three different reciprocating compressor series completing a total range of 7 models.
The brand-new GEA Grasso V XHP reciprocating compressor series features four super-efficient sizes. They provide twice the capacity than the existing types and a maximum supply temperature of 203°F / 95°C making the GEA RedGenium the only standard reciprocating heat pump to reach this temperature level. Thanks to the large temperature and pressure lift that V XHP technology allows, the series is fit for combined refrigeration and heating applications as well as for heating only using low-temperature heat sources, from cold environments for example.
The existing, efficient GEA Grasso V HP reciprocating compressor line remains available in three different sizes – the perfect, cost-effective match for medium capacity applications up to 158°F / 70°C supply temperature.
Aligned to the successful GEA BluGenium (North America) chiller design and equipped with heat exchangers configured and optimized according to each project’s requirements, the GEA RedGenium utilizes low ammonia charges and occupies a small footprint while delivering optimal efficiency.
Thanks to the enhanced supply temperature and capacity range, GEA RedGenium heat pumps are used in industrial applications where process heat is needed or fed into a local or district heating network.
Every GEA RedGenium can use any liquid heat source up to 122°F / 50°C (V XHP models up to 140°F / 60°C inlet), for example wastewater, surface water and ground water, or with a liquid secondary refrigerant for combined cooling and heating applications. The GEA Grasso V HP and the new V XHP models even allow heat sources below zero providing secondary refrigerant outlet temperatures down to +14°F / -10°C for combined refrigeration demands.
Alternatively, all GEA RedGenium heat pumps can be equipped with a cascade evaporator, directly charged with hot ammonia gas from a refrigeration plant, to efficiently recover waste heat.
Highlights and Technical Features
- Energy-efficient solution carries the GEA Add Better Label. The GEA RedGenium V HP and V XHP standard reciprocating heat pump slashes electric consumption by an average of 25% compared to its previous solution. This translates to annual savings in energy and CO₂ emissions depending on the electric mix by the same percentage.
- Future-proof with the natural refrigerant ammonia (R717)
- Heating capacity range approx. 1,700 to 10,200 MBH / 500 to 3,000 kW*)
- Heat carrier supply temperatures up to 203°F / 95°C
- Heat source temperature range between +14°F / -10°C (minimum outlet liquid heat source or sec. refrigerant medium) and up to 122°F / 50°C (maximum supply temperature, V XHP models up to 140°F / 60°C)
- Combined cooling and heating possible
- Ammonia cascade evaporator option for efficient “add-on” set-up to existing refrigeration systems
- Fully welded shell & plate heat exchanger
- Various plate materials available, all common liquids supported
- Efficiency-optimized configuration with minimized energy costs and CO₂ emissions
- Minimum footprint, comes in one piece
- Unit ready for connection, easy installation, minimum maintenance
- Stepless capacity control via frequency inverter (variable speed range 500 – 1500 rpm) and cylinder switch-off
- Industry-leading control technology with GEA Omni control panel
*) Available heating capacity per model depending on the heat source and sink temperature level, please refer to the technical data table.
Learn more with GEA RTSelect – our product selection and configuration tool.
Performance data
Stand-alone version (evaporator charged with liquid heat source fluid)
| Type | Heat Source inlet/outlet (°F) |
Heat Sink inlet/outlet (°F) |
Cooling capacity1 (TR) |
Heating capacity1 (MBH) |
Power Consumption (BHP) |
COP line2 (kW/kW) |
|---|---|---|---|---|---|---|
| GEA RedGenium 300 | 80/70 100/90 |
120/160 | 126 183 |
1,850 2,550 |
135 144 |
4.96 6.41 |
| GEA RedGenium 450 | 80/70 100/90 |
120/160 | 191 276 |
2,795 3,850 |
201 215 |
5.04 6.43 |
| GEA RedGenium 600 | 80/70 100/90 |
120/160 | 255 370 |
3,740 5,160 |
269 290 |
5.04 6.43 |
| GEA RedGenium 350 | 80/70 100/90 120/110 |
120/160 140/180 160/203 |
170 226 290 |
2,480 3,290 4,235 |
179 230 298 |
5.01 5.18 5.15 |
| GEA RedGenium 550 | 80/70 100/90 120/110 |
120/160 140/180 160/203 |
255 340 440 |
3,745 4,970 6,420 |
268 348 453 |
5.05 5.17 5.13 |
| GEA RedGenium 750 | 80/70 100/90 120/110 |
120/160 140/180 160/203 |
337 448 575 |
4,935 6,540 8,425 |
354 458 596 |
5.05 5.16 5.11 |
| GEA RedGenium 950 | 80/70 100/90 120/110 |
120/160 140/180 160/203 |
422 562 723 |
6,180 8,190 10,555 |
442 572 744 |
5.06 5.18 5.13 |
Performance data
Add-on version (cascade evaporator charged with ammonia from low-pressure chiller)
| Type | Heat Source condensing (°F) |
Heat Sink inlet/outlet (°F) |
Heat Source capacity1 (MBH) |
Heating capacity1 (MBH) |
Power Consumption (BHP) |
COP line2 (kW/kW) |
|---|---|---|---|---|---|---|
| GEA RedGenium 300 | 80.0 95.0 |
120/160 | 1,705 2,190 |
2,055 2,550 |
138 143 |
5.38 6.44 |
| GEA RedGenium 450 | 80.0 95.0 |
120/160 | 2,520 2,380 |
2,040 3,815 |
205 214 |
5.36 6.47 |
| GEA RedGenium 600 | 80.0 95.0 |
120/160 | 3,410 4,370 |
4,105 5,095 |
277 289 |
5.38 6.40 |
| GEA RedGenium 350 | 80.0 95.0 105.0 |
120/160 140/180 160/203 |
2,305 2,745 2,960 |
2,765 3,325 3,685 |
184 230 288 |
5.45 5.23 4.64 |
| GEA RedGenium 550 | 80.0 95.0 105.0 |
120/160 140/180 160/203 |
3,435 4,085 4,410 |
4,125 4,955 5,495 |
273 344 430 |
5.47 5.21 4.62 |
| GEA RedGenium 750 | 80.0 95.0 105.0 |
120/160 140/180 160/203 |
4,585 5,450 5,880 |
5,490 6,660 7,320 |
362 456 570 |
5.49 5.24 4.65 |
| GEA RedGenium 950 | 80.0 95.0 105.0 |
120/160 140/180 160/203 |
5,630 6,690 7,220 |
6,770 8,140 9,035 |
456 577 717 |
5.37 5.11 4.56 |
1. Compressor operating at max. speed of 1500 min-1
2. COP (coefficient of performance) = heating capacity / electrical consumption incl. component efficiencies
Webinar
GEA HEAT PUMPS - PRODUCTS AND APPLICATIONS
Downloads
Powiązane produkty
Dostosowane pompy ciepła GEA
Dostosowane pompy ciepła są projektowane z myślą o optymalizacji wydajności oraz szerokim zakresie temperatury i mocy. Mają szerokie zastosowanie w przemyśle oraz ciepłownictwie. Są one stosowane, gdy specjalne warunki lub wymagania przewyższają możliwości naszych standardowych pomp ciepła.
GEA BluAstrum (North America)
Featuring a sleek design and requiring minimal maintenance, the GEA BluAstrum screw-compressor-based ammonia chiller delivers reliable performance and operational advantages.
ASME/UL/CSA certified.
GEA BluGenium (North America)
This ultra-low charge, high-efficiency chiller offers a compact footprint and is driven by the reliable and proven GEA Grasso reciprocating compressor.
ASME/UL/CSA certified.
Service Products
Zestawy GEA Service do sprężarek tłokowych
Witaj w świecie prostoty z zestawami GEA Service do sprężarek tłokowych. Nasze zadanie jest jasne: sprawić, by Twoje doświadczenia związane z oryginalnymi częściami zamiennymi były bezproblemowe, a produkcja przebiegała płynniej niż kiedykolwiek wcześniej. „Odpręż się, użyj zestawu” to nie zwykły slogan, ale i obietnica, którą realizujemy.
Powiązane filmy wideo
GEA RedGenium heat pump
GEA RedGenium Heat Pump On the Move
GEA Insights
Kytero 10 — Rewolucja zaczyna się tlić od małego płomyka
Badacze i projektanci z branży biofarmaceutycznej, spożywczej oraz segmentu nowej żywności dostają do ręki nowe narzędzie: potężny akcelerator najnowszej generacji GEA kytero 10.
Jak robot udojowy zmienił życie matki
Życie Michele Schneider zmieniło się w sposób niespodziewany, gdy jej mężem został Virlei, ambitny hodowca była mlecznego i gdy razem założyli w Brazylii gospodarstwo mleczne Fazenda Inovação Schneider Milk. Jako nowicjuszka w branży produkcji mleka, Michele szybko rozwinęła pasję do zwierząt i prowadzenia gospodarstwa. Zwiększyło się także jej obciążenie pracą.
Dziś w menu: jajka ekologiczne
GEA pomaga klientom testować i rozwijać alternatywne produkty i składniki jajeczne wytwarzane przy użyciu precyzyjnej fermentacji.
