- Keeps the alley drier because the liquid drains into the channel while the scraper is performing its cleaning stroke.
- The unique design of the draw bar allows liquid and portion of manure to drain into the channel. The material is then pushed towards the cross gutter at the same time as the scraper is collecting manure in the alley.
- The paddle can be customized as per the channel shape and dimensions.
- The stainless steel paddle flips up on the return stroke in order to clear the channel bottom and avoid bringing material back.
- The under floor channel scraper draw bar can be combined with a V-Shape or a 16° scraper using steel or urethane blades.
- Built with heavy-duty steel for a long life span.
- Can be installed with steel cable or Dyneema® rope.
Downloads
Related Products
Free Stall Alley Cleaner with Chain
System designed to clean small to medium size barns
Scraper - 16°
Ruggedly built, the 16° Scraper cleans the alleys effectively. The 16° angle designed is for stabilizing the scraper. The manure is directed evenly toward the center where the pulling force is applied.
Scraper - Deep Groove System
Designed to allow liquid to naturally drain out of manure by a deeper groove.
Scraper - High Profile
To handle manure containing a lot of straw.
GEA Insights
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Beyond the machine: unlocking better plant performance
An efficient machine does not automatically make an efficient factory. Real improvement often starts by looking beyond individual equipment and understanding how processes, energy systems and operating decisions affect one another. It’s a holistic approach designed to uncover opportunities that might otherwise be missed.
How a valve reshapes the way food and drinks are made
In food and beverage plants, valves are commonly operated using compressed air. GEA Hydract® Actuation Technology moves valves with water instead, in a closed, digitally controlled circuit. The result is a valve that can be held exactly in place and steered in fine-tuned steps. This results in lower energy use and greater control.
