Menu

Aseptomag® valve line

Control Valves Aseptomag® RV

Aseptomag® single-seat control valves are used for the exact setting and control of parameters such as flow, pressure, temperature, or filling level in aseptic processing plants.

Control Valve Aseptomag® RV – standard execution

An electro-pneumatic positioner enables the exact setting of the valve stem by controlling the pneumatic actuator. A welded stainless steel bellows is used to hermetically seal the product area from outside contamination. This special design and the durable valve seat seal, made of Tefasep®, enables optimum process and product safety.

Main Components

Housing
Housings for control valves are available with either two or three port connections. The valves are produced with standard butt-weld connections by default. Mixed port connection sizes as well as various aseptic pipe connections are available upon request.
 
Internal Assembly
The internal assembly is available with or without a shrunk or screwed valve seat seal. In addition to the standard sealing material Tefasep®, other material options such as PTFE and EPDM are also available. The control cone is designed as equal-percentage by default.
 
Actuator
The standard version of the pneumatic actuator is designed as spring-closing / air-opening (NC). Alternatively, an air-closing / spring-opening (NO) option is available.
 
Clamp
Due to its solid construction, the GEA clamp enables a pressure stable and safe connection of the main components. The special design with three segments allows a service-friendly handling of the component, even under tight space conditions.
 
Positioner / Process Controller
Aseptic control valves are usually equipped with a closed centralized positioner (GRZ) mounted directly on top of the valve by a specifically designed adaptor. Depending on process requirements, it is also possible to apply a process controller instead. Other control options are available upon request.

Technical Data of standard execution

Item Size
Nominal pressure valve 10 bar
Closing pressure 5 - 6 bar (depending on valve size)
Control air pressure 6 bar
Hermetic sealing element Stainless steel bellows
Valve seat seal material Tefasep®
Housing seal Silicone
Control cone Equal-percentage
Surface quality in product area Ra≤ 0.8
Material quality in product area AISI 316L / AISI 316Ti
Max. operating temperature 150 °C (302 °F)
Max. sterilization temperature 160 °C (320 °F) for max. 30 min.

Aseptomag® Valve Technology

Aseptomag® aseptic valves are designed to meet the highest demands for aseptic processes in the dairy, food and beverage industry.

Aseptic bellows valves distinguish themselves with the uncompromisingly hermetic seal of the valve stem, thereby minimizing contamination risks and maximizing detection possibilities. The Aseptomag® valve line is the equivalent for aseptic processes to the hygienic VARIVENT® valve line and provides everything from shut-off and bottom-seat to mixproof and sampling valves. The valves meet the highest hygienic standards required, such as EHEDG and 3-A standards. Thanks to the modular structure, the Aseptomag® valve line also allows tailor-made valve solutions for specific process requirements (higher closing pressures, special materials, special design, etc). Aseptomag® valves can be equipped with T.VIS® control tops and can therewith seamlessly be integrated into an automated process plant.

Aseptic Applications

For aseptic processes, the following areas have to be considered: Product sterilization, conveying and maintaining sterility, and filling under sterile conditions. Aseptic processes signify high-quality products and/or long shelf-life, produced for specific consumer groups. Besides classic UHT milk products, medical nutrition, baby food, aseptically produced beverages and applications within biotech belong to this hygienic class.

Aseptomag® at a Glance

  • Hermetic sealing by stainless steel bellows
  • Uncompromising detection possibilities
  • Highest aseptic standard
  • Easy and safe maintenance

Sizes *

Valve type Metric Inch OD
Shut-off Valves Aseptomag® AV DN 15 – DN 150 0.75” – 6”
Shut-off Valves Aseptomag® AVBS DN 15 – DN 150 0.75” – 6”
Divert Valves Aseptomag® UV DN 15 – DN 100 0.75” – 4”
Shut-off Valves Aseptomag® AF DN 25 – DN 100 1” – 4”
Control Valves Aseptomag® RV DN 15 – DN 100 0.75” – 4”
Control Valves Aseptomag® RVIN DN 25 – DN 65 1“ – 2.5“
Back-pressure Valves Aseptomag® GD DN 15 – DN 150 0.75” – 6”
Shut-off Valves Aseptomag® AMV DN 06 – DN 10 0.25” – 0.5”
Leakage Valves Aseptomag® LV DN 40 – DN 100 1.5“ – 4“
Leakage Valves Aseptomag® DT DN 40 – DN 100 1.5“ – 4“
Leakage Valves Aseptomag® ADV DN 25 – DN 100 1” – 4”
Double-chamber Valves Aseptomag® DK DN 25 – DN 150 1” – 6”
Double-chamber Valves Aseptomag® DKBS DN 25 – DN 150 1” – 6”
Double-chamber Valves Aseptomag® DDK DN 25 – DN 150 1” – 6”
Double-chamber Valves Aseptomag® AXV DN 25 – DN 150 1” – 6”
Sampling Valves Aseptomag® PV DN 10 – DN 15 0.5” – 0.75”
Steam inlet valves Aseptomag® DE DN 25 – DN 40 1” – 1.5”
* Additional valve sizes and connection standards (i.e. ISO) available upon request

Related products

Back-pressure Valves Aseptomag® GD

Back-pressure Valves Aseptomag® GD

Back-pressure valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design.

Control Valves Aseptomag® RVIN

Control Valves Aseptomag® RVIN

Control valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The inverted control valve is specifically designed for installations where product enters the valve from the bellow side.

Divert Valves Aseptomag® UV

Divert Valves Aseptomag® UV

Divert valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellows design.

Double-chamber Valves Aseptomag® AXV

Double-chamber Valves Aseptomag® AXV

Double-chamber valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The valve type AXV includes three integrated sterile barriers (ISB).

Double-chamber Valves Aseptomag® DDK

Double-chamber Valves Aseptomag® DDK

Double-chamber valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The valve type DDK includes two integrated sterile barriers (ISB)

Double-chamber Valves Aseptomag® DK

Double-chamber Valves Aseptomag® DK

Double-chamber valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The valve type DK includes one integrated sterile barrier (ISB)

Double-chamber Valves Aseptomag® DKBS

Double-chamber Valves Aseptomag® DKBS

Double-chamber tank bottom valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The valve type DK includes one integrated sterile barrier (ISB).

Leakage Bottom-seat Valves Aseptomag® DT

Leakage Bottom-seat Valves Aseptomag® DT

Leakage tank bottom valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. With their leakage area between the two valve seats open to atmosphere, the valve is an ideal fit for UltraClean mixproof applications.

Leakage Valves Aseptomag® ADV

Leakage Valves Aseptomag® ADV

Leakage valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The valve type ADV includes one integrated steam barrier (ISB) and other than Aseptomag® DK valves, one valve seat is sealed via a radial form seal.

Leakage Valves Aseptomag® LV

Leakage Valves Aseptomag® LV

Leakage valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. With their leakage area between the two valve seats open to atmosphere, the valve is an ideal fit for UltraClean mixproof applications.

Sampling Valves Aseptomag® PV

Sampling Valves Aseptomag® PV

Sampling valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellows design and their modular structure.

Shut-off Valves Aseptomag® AF

Shut-off Valves Aseptomag® AF

Shut-off valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The extended bellow design of the type AF is ideal for applications with high activation frequencies.

Shut-off Valves Aseptomag® AMV

Shut-off Valves Aseptomag® AMV

Shut-off valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The compact design of the type AMV is ideal for fractional size applications.

Shut-off Valves Aseptomag® AV

Shut-off Valves Aseptomag® AV

Shut-off valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design.

Shut-off Valves Aseptomag® AVBS

Shut-off Valves Aseptomag® AVBS

Shut-off tank bottom valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design.

Service products

GEA Insights

Stay in touch with GEA innovations and stories by signing up for news from GEA.

Sign up

We are here to help! With just a few details we will be able to respond to your inquiry.

Contact us