8-Inch Flush Pump on Pontoon
8-Inch Flush Pump on Pontoon
8-Inch Flush Pump on Pontoon
8-Inch Flush Pump on Pontoon
8-Inch Flush Pump on Pontoon
8-Inch Flush Pump on Pontoon
Key Features
- The impeller housing can be adjusted to only pump the surface liquid stored.
- Low profile design for maximum stability.
- No seals or bearings submerged in the liquid.
- 8" (200 mm) high flow rate discharge
- The pump can be winched up for maintenance.
- Anti-slip galvanized steel deck.
- UV resistant foam filled, polyethylene float.
- Float overall dimensions: 7'-8" (2.3 m) wide by 12' (3.7 m) or 16' (4.9 m) long.
- Available motors: 7.5, 10, 15, 20, 25, 30, 40 or 50 HP (5.5, 7.5, 11, 15, 18.5, 22, 30 or 37 kW).
Typical Application
Used to pump the surface liquid of a reservoir or of a lagoon when feeding a flush flume system or used to feed flush valves to clean manure alleys or a holding area.
Downloads
Related Products
3-Inch High Pressure Pump on Pontoon
Responds to high head pressures while remaining economical.
4-Inch High Pressure Pump on Pontoon
Reaches its full potential when responding to high head pressures or when used to transfer relatively long distances.
GEA SmartFil M1 Powder packing system
Semi-automatic powder filling for low production capacity plants. The SmartFil M1 delivers high quality filling of food powders at rates up to 100 bags/hr
GEA Insights
The water equation
Across Europe, drought is a recurring reality – and no longer confined to the south. While water increasingly shapes where industries locate, its value is determined by local context. There are many technological routes to water efficiency in industrial processes, but location, energy needs and other factors are also key.
