Key Features
- The impeller housing can be adjusted to pump only the surface liquid stored.
- Low profile design for maximum stability.
- No seals or bearings submerged in the liquid.
- 6" (150 mm) discharge.
- The pump can be winched up for maintenance.
- Anti-slip galvanized steel deck.
- UV resistant foam filled, polyethylene float.
- Float overall dimensions: 7'-8" (2.3 m) wide by 12' (3.7 m) or 16' (4.9 m) long.
- Available motors: 20, 25, 30 or 40 HP (15, 18.5, 22 or 30 kW).
Typical Application
Used to pump the surface liquid of a lagoon or of a pit to a flush tank or to feed low pressure center-pivot irrigation systems.
Downloads
Related Products
3-Inch High Pressure Pump on Pontoon
Responds to high head pressures while remaining economical.
GEA SmartFil M1 Powder packing system
Semi-automatic powder filling for low production capacity plants. The SmartFil M1 delivers high quality filling of food powders at rates up to 100 bags/hr
8-Inch Flush Pump on Pontoon
Low rpm pump offering high flow rate and remarkable performance to feed a flush system.
GEA Insights
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Beyond the machine: unlocking better plant performance
An efficient machine does not automatically make an efficient factory. Real improvement often starts by looking beyond individual equipment and understanding how processes, energy systems and operating decisions affect one another. It’s a holistic approach designed to uncover opportunities that might otherwise be missed.
How a valve reshapes the way food and drinks are made
In food and beverage plants, valves are commonly operated using compressed air. GEA Hydract® Actuation Technology moves valves with water instead, in a closed, digitally controlled circuit. The result is a valve that can be held exactly in place and steered in fine-tuned steps. This results in lower energy use and greater control.
