Key Features
- The impeller housing can be adjusted to only pump the surface liquid stored.
- Low profile design for maximum stability.
- No seals or bearings submerged in the liquid.
- 8" (200 mm) high flow rate discharge
- The pump can be winched up for maintenance.
- Anti-slip galvanized steel deck.
- UV resistant foam filled, polyethylene float.
- Float overall dimensions: 7'-8" (2.3 m) wide by 12' (3.7 m) or 16' (4.9 m) long.
- Available motors: 7.5, 10, 15, 20, 25, 30, 40 or 50 HP (5.5, 7.5, 11, 15, 18.5, 22, 30 or 37 kW).
Typical Application
Used to pump the surface liquid of a reservoir or of a lagoon when feeding a flush flume system or used to feed flush valves to clean manure alleys or a holding area.
Downloads
Related Products
3-Inch High Pressure Pump on Pontoon
Responds to high head pressures while remaining economical.
4-Inch High Pressure Pump on Pontoon
Reaches its full potential when responding to high head pressures or when used to transfer relatively long distances.
GEA SmartFil M1 Powder packing system
Semi-automatic powder filling for low production capacity plants. The SmartFil M1 delivers high quality filling of food powders at rates up to 100 bags/hr
GEA Insights
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Beyond the machine: unlocking better plant performance
An efficient machine does not automatically make an efficient factory. Real improvement often starts by looking beyond individual equipment and understanding how processes, energy systems and operating decisions affect one another. It’s a holistic approach designed to uncover opportunities that might otherwise be missed.
How a valve reshapes the way food and drinks are made
In food and beverage plants, valves are commonly operated using compressed air. GEA Hydract® Actuation Technology moves valves with water instead, in a closed, digitally controlled circuit. The result is a valve that can be held exactly in place and steered in fine-tuned steps. This results in lower energy use and greater control.
