Menu

Scraper - 16°

Ruggedly built, the 16° Scraper cleans the alleys effectively. The 16° angle designed is for stabilizing the scraper. The manure is directed evenly toward the center where the pulling force is applied.

Free Stall Cleaner - 16° Tilting Scraper

  • When the scraper is backing up, the tilting blade flips up to avoid bringing manure. Also, the folding ends folds towards the center to get away from the side curbs. It reduces the risk of injuring the cows that are lying in the stalls.
  • The scraper itself is 7½" (19 cm) high.
  • Available with floor mounted or groove guided draw bar.
  • Adapted for alleys between 73" (1,85 m) to 204" (5,18 m) in width.
  • Available with steel blades or flexible urethane blades that can be adjusted to compensate wear. Several draw bar accessories available for concrete alley, rubber flooring and sand bedding.
  • Optional hinge to fold up the scraper towards the center.
  • Choice among different folding ends: regular 6" (15 cm) high, slanted or regular with roller.
  • The optional adjustable folding ends keeps the scraper centered widthwise while cleaning an alley without a groove.

Global Page Information

Related products

Free Stall Alley Cleaner with Cable

Free Stall Alley Cleaner with Cable

A free stall cleaner system with cable can be used to clean two, three or four alleys. The same drive unit controls all the scrapers. While one scraper is cleaning one alley, the other is backing up. The 16°, the V-Shape and the Straight scrapers are all available with the cable system. The main advantage of a cable system is the choice of several scraper configurations that allow cleaning of very long manure alleys.

Free Stall Alley Cleaner with Chain

Free Stall Alley Cleaner with Chain

The resistance of the chain makes these free stall alley systems a solid value.

Scraper - Deep Groove System

Scraper - Deep Groove System

The deep Groove Scraper has been designed for alleys with a groove ranging from 4’’ (102 mm) to 10’’ (254 mm) deep. When using this scraper, the alley must be sloped towards the center. This allows the liquid to naturally drain out of the manure. The integrated toggling flat bar pushes solids contained into the groove towards the cross gutter.

Scraper - High Profile

Scraper - High Profile

To handle manure containing a lot of straw.

Scraper - Straight

Scraper - Straight

Best suited when space is limited at the drop point as the scraper is straight and shorter.

Scraper - Under Floor Channel

Scraper - Under Floor Channel

The raised design of the under floor channel draw bar allows liquid manure to flow into a channel installed underneath the manure alley. The channel can be made of concrete, circular or rectangular, or corrugated PVC pipe. During the cleaning stroke, a portion of the manure runs into the channel and is pushed towards the cross gutter by means of the integrated paddle. When using this type of scraper, the alley must be sloped towards the center allowing the liquid to naturally drip out of the manure.

Scraper - V-Shape

Scraper - V-Shape

The V-Shape Scraper is best suited to clean narrow alleys or when manure dries fast.

Tube Scraper System

Tube Scraper System

The opening in the draw bar allows manure and liquid to drain into the channel behind the paddle. This way, the paddle directs only the material from the previous cleaning stroke towards the cross gutter. A wheel positioned at the rear of the scraper pushes material into the tube to keep the groove free from any obstruction.

Find dealer

Please note that this is a global webpage. For more information on the availability of this product in your country please reach out to your local GEA dealer.

Find dealer

GEA Insights

Stay in touch with GEA innovations and stories by signing up for news from GEA.

Sign up

We are here to help! With just a few details we will be able to respond to your inquiry.

Contact us