Cross Gutter Cleaner with Cable
System designed for cross gutter that does not exceed 540' (165 m) long. Easy servicing and suited for sand bedding.
Cross Gutter Cleaner with Cable
The cable cross gutter cleaner consists of a drive unit, gutter wheels, at least one scraper and a cable. This system is designed to pull a scraper inside a cross gutter in order to direct the manure in a reception pit or any other means of storage. The drive unit is equipped with one or two electric motors and speed reducers depending on the cleaning requirements.
- The cable cross gutter scraper is adapted for a cross gutter having 36" (914 mm) of width.
- Maximum cross gutter length of 540' (165 m).
- Perfectly suited for sand bedding.
- Shuttle stroke scrapers configuration available to clean longer cross gutter.
Drive unit configurations
- SWR-300 with or without double motor in a recess.
- SWR-300 with or without double motor on stands with 2 wheels.
- SWR-300 with or without double motor on stands with 1 wheel.
Related products
Cross Gutter Cleaner with Chain
The cross gutter cleaner with chain is a system running in close circuit that convey manure and bedding from a cross gutter, in a free stall barn, to a hydraulic piston pump or a reception pit. To do so, a drive unit, installed at one end on concrete between gutters, drives the chain and the paddles to collect manure in the loaded gutter until it drops in a hydraulic piston pump or reception pit. Then the paddles, which are free of manure, run back in the return gutter.
Free Stall Alley Cleaner with Cable
A free stall cleaner system with cable can be used to clean two, three or four alleys. The same drive unit controls all the scrapers. While one scraper is cleaning one alley, the other is backing up. The 16°, the V-Shape and the Straight scrapers are all available with the cable system. The main advantage of a cable system is the choice of several scraper configurations that allow cleaning of very long manure alleys.
Free Stall Alley Cleaner with Chain
The resistance of the chain makes these free stall alley systems a solid value.
Hydraulic Cross Gutter Cleaner
One hydraulic cylinder operates back and forth a long square tube where several paddles are fixed on it. These paddles opens and closes as they going forward and backward in the bottom of the cross gutter. This way, the manure is pushed or pulled all the way to the reception pit or to a hydraulic piston pump hoppers. A common installation will use the same power unit to simultaneously operate scraper(s) to collect manure in the alley(s), cross gutter cleaner and hydraulic piston pump.
Downloads
-
Barn Cleaners for Use in Tie Stall Barns - Brochure / EN
PDF 2,97 MBDownload -
Nettoyeurs d’étable: Pour répondre aux besoins des étables à stabulation entravée - Brochure / FR
PDF 3,08 MBDownload -
Stallreinigungssysteme für Anbindeställe - Broschüre / DE
PDF 2,42 MBDownload -
Product range for perfect stall planning: Overview of barn equipment, feeding and cleaning systems
PDF 19,71 MBDownload -
Stalltechnik für Milchviehbetriebe: Praktische Systemlösungen zur Aufstallung, Gülletechnik und Fütterungstechnik - Katalog 2014 / DE
PDF 20,27 MBDownload
Please note that this is a global webpage. For more information on the availability of this product in your country please reach out to your local GEA dealer.
Find dealer