Barn cleaning system offered by GEA are adapted to operate in clock wise or counter clock wise rotation – By standing up behind the drive unit, you determine the rotation of the system . Corner boxes and other features are available to suit your installation and ease your manure handling management.
H-86 and H-95 Heavy-Duty Drive Units
- The H-86 drives up to 500' (152 m) of chain.
- The H-95 drives up to 700' (213 m) of chain.
- Automatic releasing clutch in case of over load.
- Quick tensioner mounted on the drive unit frame when installed on all elevators 15' (4,5 m) long and under. For longer elevators, the quick tensioner is located close to the barn to ease chain tensioning operation.
- Insulated motor base to protect against stray voltage.
- 2½" (6,4 cm) main drive shaft mounted on greasable nylon bushings.
- Drive shaft made of high precision steel and mounted on greasable ball bearings.
- Double belt clutch pulley.
- Roller chain tensioners made of UHMW plastic.
Chain and paddle models
Three chain models available: 7/8" (22 mm), Pintle and Hook & Eye chains. All paddles are made of 1/4" (6 mm) thick rugged steel. Paddle sizes available are 2" (51 mm) wide and each of them comes in two different heights choice.Downloads
GEA Insights
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Beyond the machine: unlocking better plant performance
An efficient machine does not automatically make an efficient factory. Real improvement often starts by looking beyond individual equipment and understanding how processes, energy systems and operating decisions affect one another. It’s a holistic approach designed to uncover opportunities that might otherwise be missed.
How a valve reshapes the way food and drinks are made
In food and beverage plants, valves are commonly operated using compressed air. GEA Hydract® Actuation Technology moves valves with water instead, in a closed, digitally controlled circuit. The result is a valve that can be held exactly in place and steered in fine-tuned steps. This results in lower energy use and greater control.
