GEA solutions for crude oil and heavy fuel oil
In diesel engine power plants, fuel quality is critical to performance, efficiency and engine longevity. Whether operating on crude oil or heavy fuel oil (HFO), GEA’s advanced treatment systems ensure your engines run cleanly, safely and cost-effectively.
Crude oil treatment – Safe and efficient operation
Crude oil is increasingly used as fuel in diesel engine power plants, particularly in pipeline infrastructure and remote operations. Despite being delivered in a pre-cleaned and degassed state, it still contains waxes, water and solids that must be removed before combustion. The fuel’s wax content liquefies only above 50 °C, requiring separation temperatures between 60 °C and 98 °C. Its low flash point also demands explosion protection measures such as inert gas flushing.
GEA’s treatment solution addresses these challenges through single-stage centrifugal separation, integrated purging and flushing and automation that enables continuous, unattended operation over extended periods. All components are ATEX-compliant for safe use in hazardous environments.
This approach protects critical engine components - including cylinder liners, pistons and injection systems - while reducing wear and operating costs, making it ideal for long-term deployment in demanding conditions.
Heavy fuel oil treatment – Reliable performance and protection
Heavy Fuel Oil (HFO) remains a widely available and cost-effective option for power generation. However, its impurities - such as asphaltenes, water and catalytic fines - can lead to corrosion and deposits inside the engine if not properly treated. With high viscosity (up to 1650 cSt at 50 °C) and density reaching 1.01 kg/l at 15 °C, HFO is typically obtained from atmospheric or vacuum distillation, as well as conversion processes like visbreaking and catalytic cracking.
GEA’s treatment solution uses single-stage centrifugal separation, designed to handle both high-grade and low-grade fuels. The modular system integrates heating and control, with an optional stand-by centrifuge to enhance reliability.
This setup efficiently removes solids and water, minimizes engine wear and supports long service intervals - ultimately lowering lifecycle costs and maintenance demands.
GEA separators for clean fuel and maximum uptime in power plants
Ready for reliable fuel oil treatment?
Whether you're running on crude oil or heavy fuel oil, GEA’s treatment systems are engineered to deliver clean fuel, protect your engines and reduce your operating costs.
Let GEA help you power forward - efficiently, safely and sustainably. Contact us today to find the right treatment system for your fuel.
Products & Technologies
Showing 2 of 2
Centrifugal Separator
GEA separators are designed for liquid-based applications. Using centrifugal force, they are used for separating suspensions consisting of two or more phases of different densities, i.e. they can be used for liquid-liquid separation, for liquid-liquid-solid separation or for liquid-solid separation. They are equally as effective at separating liq...
Machine automation & control
Every plant or machine, which is designed for a reliable long-term operation, requires a control unit that enables the communication between the different system parts. It is one of the most important component that guarantees reliability and efficient operation.
GEA Insights
The water equation
Across Europe, drought is a recurring reality – and no longer confined to the south. While water increasingly shapes where industries locate, its value is determined by local context. There are many technological routes to water efficiency in industrial processes, but location, energy needs and other factors are also key.
