Trade press release

GEA helps Nestlé cut steam consumption by 75% at its new infant formula plant

10 Jan 2024

At Nestlé’s plant in Nunspeet, the Netherlands, GEA is to equip a milk powder line for hypoallergenic infant formula with the latest process and heat pump technology. According to Nestlé, thanks to an innovative heat recovery from the spray dryer and further processes, the plant will use 75 percent less energy for steam and massively reduce carbon emissions. In this way, GEA is supporting Nestlé on its path to net zero by making the energy supply to Nestlé production facilities emission-free by 2050.

Image: In response to increased demand for its Althera and Alfare infant formula brands, Nestlé is currently doubling production capacity at the Nunspeet plant with an additional processing line. Source: Nestlé

In response to increased demand for its Althera and Alfare infant formula brands, Nestlé is currently doubling production capacity at the Nunspeet plant with an additional processing line. Source: Nestlé

In response to increased demand for its Althera and Alfare infant formula brands, Nestlé is currently doubling production capacity at the Nunspeet plant with an additional processing line. For the first time, Nestlé will be using a GEA heat recovery system that is fed by exhaust air from the spray drying plant and, in turn, provides 80°C hot water for its operation. As part of the project, GEA will also equip the complete wet processing technology, which supplies the Nestlé spray drying line with the prepared milk. Installation of the process technology and heat supply system is planned for this year. The plant will go into operation in 2025.

Image: At Nestlé’s plant in Nunspeet, the Netherlands, GEA is to equip a milk powder line for hypoallergenic infant formula with the latest process and heat pump technology. Source: Nestlé

At Nestlé’s plant in Nunspeet, the Netherlands, GEA is to equip a milk powder line for hypoallergenic infant formula with the latest process and heat pump technology. Source: Nestlé

Recovering waste heat from spray dryer to reduce energy consumption

Nestlé’s aim with the investment project is not only to increase capacity, but also to advance its sustainability agenda by reducing carbon emissions, dust emissions and water demand. Exploiting renewable heat energy is a focus of the company’s climate strategy.

“The new plant in Nunspeet will also serve as a Group-wide demonstrator for future-oriented solutions to minimize energy consumption and greenhouse gas emissions in milk powder production. We are already familiar with heat pumps in various production processes. But using them with spray dryers, the most energy-intensive part of the process, is something new for us. The GEA system enables us to reduce the plant’s steam consumption by 75%,” explains Gerben Koopmans, Engineering Manager at Nestlé, comparing the new to the existing line. For these reasons, the project is executed with subsidy of the Ministry of Economic Affairs and Climate.

Image: The GEA Grasso V XHP high-pressure ammonia reciprocating compressor forms the heart of GEA’s heat pump system in Nestlé’s new milk powder line at Nunspeet, the Netherlands. Source: GEA

The GEA Grasso V XHP high-pressure ammonia reciprocating compressor forms the heart of GEA’s heat pump system in Nestlé’s new milk powder line at Nunspeet, the Netherlands. Source: GEA

Integrating process and heating/cooling technology

“Our integrated solutions combining process technology with heating and cooling technology set a new benchmark in milk powder production, because fusing the two disciplines in production planning and design implementation significantly reduces the plant’s energy consumption and carbon footprint,” says Ronald Hofland, GEA Sales Manager.

In addition to the ammonia heat pump for the spray dryer, GEA is providing a second heat pump that supplies hot water at 85°C to heat the entire production line and run the various dehydration processes, as well as cold water at 1.5°C to air-condition the factory. GEA’s process technology for the wet line includes state-of-the-art evaporators, inline formula mixers, a homogenizer, high-pressure and high-shear pumps, heat exchangers, valves, as well as all other connecting components and pipework. The heat pump system will provide this process technology with hot and cold water for maximum energy efficiency in operation.

Contact

Fanny Förster

Phone: 49 211 9136 1504

About GEA

GEA 是食品加工行业及众多工业领域的领先供应商之一,2019 年的销售总额约达 49 亿欧元。

作为国际技术集团,我们专注于机械制造,生产运营,工艺技术及其设备组件。 GEA 为各种终端用户市场的复杂生产流程提供可持续的能源解决方案,并提供全面的服务组合。集团在长期持续增长的食品和饮料行业的收入约占其总收入的 70%。截至 2018 年 12 月 31 日,集团的全球员工已超过 18,500 人。GEA 在其业务领域中是市场和技术领导者。GEA 是德国 MDAX 上市公司(G1A,WKN 660 200),拥有 STOXX® Europe 600 指数和优选的 MSCI 全球可持续发展指数。
接收 GEA 新闻

订阅 GEA 的新闻,掌握 GEA 的创新信息和故事。

联系我们

我们随时为您提供帮助!您只需提供少量详细信息,我们就能回复您的查询。