Future on board. Today. GEA at SMM 2018 in Hamburg

Future on board. Today.

Full speed ahead! When we make landfall at the SMM in Hamburg, from September 4 – 7, 2018, we will already have the future on board. In keeping with our motto "Future on board. Today.", we invite you to join us on a grand and exciting voyage. We're not just going to weigh anchor, we're heading out to sea at full speed. For example, check out our new GEA marine Separator. This series of machines and its service concept will be one of the highlights of our booth.

We look forward to helping you set a course for success. Our innovative marine solutions combine environmental protection with efficiency, dependability and safety.

New GEA marine Separator and GEA EffiClean

The new separator series is setting new standards in terms of service simplicity, personnel deployment, energy efficiency, operating costs and environmental protection.  With the introduction of the new EffiClean, GEA offers an 

In-situ disk cleaning solution for GEA marine Separators.

GEA BallastMaster marineX

2-step highly efficient mechanical and physical ballast water treatment system for ultra-efficiency and safety in a large range of capacities. 

CO2 Transcritical Technology

Green refrigeration technology from GEA with environmentally sustainable cooling systems for cruise shipping, with possibilities to add heat recovery for further energy efficiency improvement. 

GEA Piston Compressors

Highly efficient and durable piston compressors from the GEA Bock HG44e and GEA Bock F76.

OPC UA-Module Type Package

GEA already meets today the requirements of the marine industry for the modularization of process plants. 

GEA Grasso LT series Screw Compressors

Marine-suitable screw compressors that combine high performance with long lifespan and a range of maximum delivery rates. 

GEA Service – For your continued success

Service solutions throughout the full life cycle for optimum reliability on board.

Press Tour

A Press Tour will be conducted at the GEA stand at SMM on Tuesday, September 4, from 1400 – 1430. Members of the media may contact Dr. Michael Golek for more information and to register to participate.

Screw compressor press release

GEA at SMM: GEA screw compressors of the LT series for high efficiency and long product lifetime

GEA showcased its LT series of screw compressors at SMM, the leading international trade fair for the maritime industry. GEA's marine screw compressors are suitable for the open seas and offer the highest efficiency with a long product lifetime.

Download Press Release
Smart Connectivity press release

GEA at SMM: Smart Connectivity - The OPC UA - MTP (Module Type Package) from GEA now also for the marine industry

With the new separator generation, the intelligent shipping of tomorrow is already available today. The demand for transparent machine and operating data is also increasing in the maritime industry in line with the requirements of modern digitization.

Download Press Release
GEA Marine System Solutions

GEA Marine System Solutions

Expertise for maximum performance, profitability and environmental protection

GEA Marine System Solutions
BallastMaster press release

GEA at SMM: Chemical-free ballast water treatment with the GEA BallastMaster marineX

The BallastMaster marineX, which GEA presented at SMM, the world's leading trade fair for the maritime industry in Hamburg, makes chemical-free ballast water treatment possible. The plant was developed by Trojan Technologies (London, Ontario, Canada).

Download Press Release
Compressors for marine applications press release

GEA reciprocating compressors for marine applications

Under the motto "Future on board. Today" GEA will be presenting compressor solutions for maritime applications at this year's SMM in Hamburg. GEA compressors are suitable for the air conditioning of cruise ships and freighters as well as for the temperature control of cargo and food cooling.

Download Press Release

行业新闻稿

  • 5九月
    2018

    "Future on board. Today": GEA at the SMM in Hamburg – new GEA marine Separator

    GEA engineers are committed to pushing the limits and even exceeding them with intelligent solutions and customer benefits. The latest example of one of these successful product developments is the new GEA marine separator. GEA presented the machine at SMM, the leading international trade fair for the maritime industry in Hamburg.

  • 4九月
    2018

    GEA at SMM: GEA EffiClean for the effective and time-saving cleaning of mineral oil separators

    The manual cleaning of the disk stack of mineral oil separators has been a tedious, time-consuming and dirty matter. Dismantling was often required. With its service product EffiClean, GEA is presenting an innovative solution at the SMM, the leading international maritime trade fair in Hamburg, with which disk stacks can be cleaned in just 20 minutes, depending on the degree of soiling, instead of usually up to eight hours.

  • 13八月
    2018

    "Future on board. Today": GEA at SMM in Hamburg

    With the theme "Future on board. Today", GEA presents innovative solutions that combine environmental protection with economy, reliability and safety at SMM, the world's leading trade fair for the maritime industry. SMM takes place in the Hamburg exhibition halls from September 4 to 7, 2018.

  • 31七月
    2018

    Cruise industry embraces transcritical CO2 technology

    International technology group GEA signed a contract for its new transcritical CO2 industrial refrigeration technology, with P&O Cruises, part of Carnival Corporation & PLC, the world’s largest commercial cruise ship operator.

即将发生的事件

获取路线

Hamburg Messe
Messeplatz 1
20357 Hamburg Germany
打开地图

想要了解更多信息?

联系我们

GEA proudly presents

New GEA marine Separator increases efficiency on board

The new GEA separator for marine applications massively changes the working day on board and increases the efficiency of ships and crews. With an efficiency level of more than 96% and potential savings of up to 30,000 kWh per year, the integrated direct drive is the heart of GEA's new separator series. The direct drive with its synchronous motor requires no belt and no coupling. For the first time, spindle and motor are available as a compact plug-and-play "exchange unit". This greatly simplifies installation and maintenance of the machine, the separator is accessible from all sides and the space requirement on board is reduced by 50%.

Maritime separation technology that sets new standards.

GEA EffiClean for the effective and time-saving plate cleaning of mineral oil separators

Manual cleaning of the plate packs of mineral oil separators used to be a laborious and time-consuming process. With GEA EffiClean, we now supply a solution with which plate packs can be cleaned in just 20 minutes – instead of usually up to eight hours. The cleaning process can be carried out directly on the running machine, disassembly is not necessary. With a minimum footprint of 0.4 sqm, the mobile unit can even fit into the smallest of spaces. The robust stainless steel construction withstands the demanding operating conditions. In combination with GEA EffiClean, the efficiency of the GEA marine Separator is additionally increased.

GEA EffiClean CIP unit

Ballast water treatment without chemicals with the GEA BallastMaster marineX

In cooperation with Trojan Technologies GEA offers the BallastMaster marineX for ballast water treatment. The GEA BallastMaster marineX is designed for a throughput of 150 - 1500 m³/h and is available as explosion-proof version.  The system effectively disinfects organisms with a UVT value of 44% and gets by completely without chemicals. It combines effective 32-μm filtration with subsequent UV irradiation for disinfection in one housing. This prevents germs or organisms from entering foreign ecosystems when the ballast water is drained.

GEA BallastMaster marineX

GEA Grasso LT series screw compressors for high performance and long service life

The GEA Grasso LT series is an example of GEA's many seaworthy screw compressors. It combines high performance with a long service life and covers maximum flow rates of approx. 800 to 11,500 m³/h with 16 sizes. Resource-saving operation is made possible by features such as the special 5/6 gyro profile and the ingenious axle bearing. The compressors are infinitely variable in the range from 10 to 100 % of the nominal capacity and can optionally be equipped with a Vi-slider, with which the internal volume ratio can be changed.

GEA_GRASSO_LT_SERIES

想要了解更多信息?

联系我们
Future on board. Today. GEA at SMM 2018 in Hamburg

Future on board. Today.

Full speed ahead! When we make landfall at the SMM in Hamburg, from September 4 – 7, 2018, we will already have the future on board. In keeping with our motto "Future on board. Today.", we invite you to join us on a grand and exciting voyage. We're not just going to weigh anchor, we're heading out to sea at full speed. For example, check out our new GEA marine Separator. This series of machines and its service concept will be one of the highlights of our booth.

We look forward to helping you set a course for success. Our innovative marine solutions combine environmental protection with efficiency, dependability and safety.

New GEA marine Separator and GEA EffiClean

The new separator series is setting new standards in terms of service simplicity, personnel deployment, energy efficiency, operating costs and environmental protection.  With the introduction of the new EffiClean, GEA offers an 

In-situ disk cleaning solution for GEA marine Separators.

GEA BallastMaster marineX

2-step highly efficient mechanical and physical ballast water treatment system for ultra-efficiency and safety in a large range of capacities. 

CO2 Transcritical Technology

Green refrigeration technology from GEA with environmentally sustainable cooling systems for cruise shipping, with possibilities to add heat recovery for further energy efficiency improvement. 

GEA Piston Compressors

Highly efficient and durable piston compressors from the GEA Bock HG44e and GEA Bock F76.

OPC UA-Module Type Package

GEA already meets today the requirements of the marine industry for the modularization of process plants. 

GEA Grasso LT series Screw Compressors

Marine-suitable screw compressors that combine high performance with long lifespan and a range of maximum delivery rates. 

GEA Service – For your continued success

Service solutions throughout the full life cycle for optimum reliability on board.

Press Tour

A Press Tour will be conducted at the GEA stand at SMM on Tuesday, September 4, from 1400 – 1430. Members of the media may contact Dr. Michael Golek for more information and to register to participate.

想要了解更多信息?

联系我们
Future on board. Today. GEA at SMM 2018 in Hamburg

We work alongside our customers in close partnership, supporting them throughout the entire life cycle of their equipment and solutions ensuring lasting business success. However, to keep your ship operating at optimum performance, and to ensure your continued success, it needs to be maintained. That’s where GEA Service comes in.

Working with GEA Service means partnering with a dedicated team of service experts. From project engineering, installation, and commissioning to maintaining and improving the performance of your ship and equipment.

  • Getting you started ‒ Beginning of Life Services with seamless support for instant productivity and performance
  • Keeping it running ‒ Lifetime Services with the cost-efficient way of ensuring safety and reliability
  • Constantly improving ‒ Extended Life Services by sharing our knowledge to safeguard our customers’ investment
  • Together with you ‒ Consulting & Enhanced Operations by enduring commitment to our customers and their business

Our seamless service offerings will ensure that our customers can meet the ever-changing demands of their global consumers and markets, not just today, but tomorrow and in the future.

想要了解更多信息?

联系我们