iNTELPUMP is designed to sense the level of milk in the receiving can via a stainless steel float and then cycle the milk pump contactor according to the level.
Additional features such as the ability to pump out the receiving can at the end of milking as it waits for milk to settle in the delivery line. Then, using the milk purge valve, injects filtered compressed air in the milk delivery line to push it out to the bulk milk tank.
When networked with an iNTELSTART the system can be programmed to switch the plate heat exchanger pump or solenoid valve on and off at the same time as the milk pump during milking, thereby reducing water usage. The iNTELSTART will also turn the water off automatically during the wash cycle, eliminating the risk of accidental cooling of hot wash water.
Run On Time | 1- 60 seconds |
Pump Out Time | 1-30 seconds |
Milk / Wash Delay | 1-60 seconds |
Milk Clear Time | 1-60 seconds |
Injector On Time | 1-60 seconds |
Actuator Cycle Time | 1-60 seconds |
Actuator On Time | 1-30 seconds |
Pump Off Delay | 1-120 seconds |
Network | Yes, automatic initiation of milk, wash and off modes. |
Otomatik süt sağımındaki en son gelişme: ineklerin genellikle günde iki veya üç kez olmak üzere sabit sağım zamanlarında gruplar halinde sağıldığı bir süt ürünleri çiftçiliği uygulaması olan toplu süt sağımı. Otomasyon teknolojisi,...