The GEA carbonating system type DIMIX™ has been designed for high-precision continuous mixing and carbonation of beverages.
Mixing & carbonation of beverages with carbonating system type DIMIX™
GEA offers two different types according to your product to be mixed and carbonated.
For high-precision continuous mixing and carbonation of soft drinks we recommend the system type DIMIX-C™.
Exact control of the original wort (alcohol content) and CO2 content - this is what the GEA DIMIX-B™ system offers.
Mixing and carbonating system type DIMIX-C™ for soft drinks
The GEA carbonating system type DIMIX-C™ has been designed for high-precision continuous mixing and carbonating of soft drinks.
Liquid flows are measured by accurate flow meters (e.g. mass flow meter MDM or electromagnetic flow meter IZM™) and transmitted to the automatic system control. The digital controller compares the measured values in consideration of the desired mixing ratio, and the measuring devices are controlled in a way that the set values are exactly observed. Any deviations are fully compensated. Deaeration vessels avoid air coming in so that no measuring faults happen.
A booster pump conveys the finished beverage to the CO2 saturator. The saturator works on the Venturi principle. The flow velocity through the saturator is kept constant within the optimum working range by an optimizing control operation. The partial vacuum generated in the area of the smallest cross-section of the saturator causes a reduction of the pressure level and thus involves the desired suction effect for CO2. Apart from that, the instantly increased flow velocity guarantees a fine distribution of the CO2 gas and its homogeneous mixing with the product. CO2 is supplied to the saturator from the pressure tank, the constant overpressure of which guarantees an equal carbonation of the beverage. In addition, this process permits a loss free supply of CO2.
Consequently, the carbonation of the beverage essentially depends on the tank pressure, which is adjusted as a function of the desired CO2 setpoint of the specific beverage and which is only slightly higher than the saturating pressure of the product. Moreover, the temperature compensation adapts the pressure in the tank to the saturating curve.
The CO2-content is controlled by means of parameterizable limits by changing the pressure in the mixing tank.
Mixing and carbonating system type DIMIX-B™ for original wort (OG) optimization
The GEA High-Gravity-Brewing system (HGB) type DIMIX-B™ has been designed for the exact control of the original wort (alcohol content) and CO2 content.
The original wort- and CO2-contents which are required for the product are stored in the recipes in the operating unit. The original wort and CO2 meter detect the current measured values and the controller causes a permanent setpoint-to-actual value comparison. The resulting flow rates are adjusted by means of high-precision monitoring valves.
By means of the saturator the CO2 is finely spread in the product so that a complete bonding takes places in the following saturating pipe section.
The GEA carbonating systems type DICAR™ have been designed for continuous high-accuracy carbonation of soft drinks. They mainly consist of the CO2 saturator incl. appropriate fittings, carbonating tank and the analysing unit (option).
DICON™ - não é somente um módulo, é uma tecnologia
DIMIX-B™ Carbonating System - Data Sheet D3754-00en
DIMIX-C™ Beverage mixer - Data Sheet D3754-01en
Your strong partner for the food and beverage industries - Brochure
Metering Systems and Process Plant for the Food and Beverage Industry - Brochure
Metering Systems & Process Plant for the Brewing Industry - Brochure
Mantenha-se atualizado com as inovações e histórias da GEA, se registrando para receber notícias sobre a GEA.Registrar-se
Estamos aqui para ajudar! Com apenas alguns detalhes poderemos responder à sua pergunta.Entre em contato