Benefits of our centrifuges
- High efficiency in oil recovery
- Enhanced separation
- Versatility in sludge compositions
- Robust design
- Continuous operation and minimal downtime
- Reduced waste volumes
- Environmentally friendly on-site treatment
The importance of tank bottom treatment
Tank bottoms refer to the residual sludges and sediments that accumulate at the bottom of storage tanks used in the oil and gas industry. These sludges contain a high percentage of recoverable oil, making them valuable products. However, they are known for being difficult to handle due to their high solids and emulsion content as well as their high viscosity.
Proper treatment of tank bottoms is crucial not only for recovering valuable hydrocarbons but also for minimizing environmental impact and reducing waste disposal costs. Untreated tank bottom sludge, which can contain 10-70% oil, 30-90% water and 5-20% solids, poses significant challenges due to its composition. If not treated on-site, this sludge must be either incinerated or transported to specialized treatment plants, both of which are costly and environmentally hazardous.
Efficient oil recovery with GEA centrifuges
GEA offers an advanced portfolio of separation technologies designed to effectively treat tank bottoms. Separator and decanter centrifuges provide an efficient solution for processing tank bottom sludge. These technologies are engineered to handle the complex composition of slop oils, which can have oil viscosities reaching up to 600 cSt at 50°C and specific gravity ranging from 0.8 to 0.96 g/ml. Additionally, GEA equipment is built to withstand the challenges posed by low pH values, high chloride concentrations, abrasive particles, organic solids and the presence of asphaltenes.
Maximize hydrocarbon recovery with GEA
GEA has developed a method to recycle oils from tank bottom sludge in an environmentally friendly manner, offering significant advantages to customers. The combined mechanical separation technology, used in several stages along with heating and chemical enhancements, enables the recovery of 80-95% of salable hydrocarbons. This not only adds value by recovering hydrocarbons that would otherwise be lost but also significantly reduces the total disposal costs. By integrating GEA separator and decanter centrifuges into the treatment process, oil companies can efficiently process tank bottom sludge, turning a challenging waste product into a valuable resource while minimizing environmental impact.
Single stage treatment
For feedstock material that can be efficiently processed through dewatering and simultaneous oil and water separation, GEA's 3-phase single-stage decanter centrifuges are the preferred solution. These centrifuges can handle high solid content achieving maximum dewatering and clarification in one stage, making them ideal for easier slop oil treatment requirements.
Single-stage treatment with 3-phase decanter centrifuge
Double stage treatment
In cases where the feedstock is more challenging to treat or higher oil quality is required, GEA's double-stage treatment process becomes more viable. This involves using 2-phase decanter centrifuges followed by high-speed disk stack centrifuges. The disk stack machines process the decanter centrate phase, separating ultra-fine particles and maximizing water removal. This results in a high-quality oil product that can be merchandized similarly to crude oil.
Double-stage treatment with 2-phase decanter centrifuges and disk stack centrifuges
Produkty i technologie
Wyświetlane elementy: 2 z 2
Separator odśrodkowy
Wirówki GEA zostały zaprojektowane do pracy z produktami opartymi na bazie cieczy. Za sprawą siły odśrodkowej są stosowane do wirowania mieszanin składających się z co najmniej dwóch faz o różnej gęstości, tj. mogą być stosowane do oddzielania ciecz-ciecz, oddzielania ciecz-ciecz-frakcja stała lub oddzielania ciecz-frakcja stała. Są równie skutec...
Wirówki dekantacyjne
Dekantery będą coraz bardziej przydatne, jeżeli zawartość frakcji stałej w zawiesinie do przetworzenia będzie szczególnie wysoka. Urządzenia te przynoszą korzyści w postaci wysokiej skuteczności oczyszczania i maksymalnego odwadniania oraz oddzielania płynów przy jednoczesnym usuwaniu części stałych. Główne wymogi w tym procesie to duża szybkość ...
Downloads
GEA Insights
Bilans wodny
W całej Europie susza staje się powracającym zjawiskiem – i nie dotyczącym już tylko południa. Choć dostęp do wody w coraz większym stopniu wpływa na wybór lokalizacji zakładów przemysłowych, to o jej wartości decyduje kontekst lokalny. Istnieje wiele rozwiązań technologicznych pozwalających na oszczędne gospodarowanie wodą w procesach przemysłowych, jednak kluczowe znaczenie mają także lokalizacja, zapotrzebowanie na energię oraz inne czynniki.
