Homogenizing Peripheral Devices
O.P.S. Oil Purification System
The Oil Purification System (O.P.S.) is the by-pass filtration unit able to maintain high oil quality and to guarantee a continuous oil regeneration by removing particles, water, corrosive gases and impurities enhancing oil lifetime, quality and safety.
Stand-alone system saves time and cost
The O.P.S. filtration system is realized to operate in continuous independently from the homogenizer so the maintenance time doesn’t compromise machine operation and allows a huge costs and time saving for the customers. The O.P.S. thus permits to reduce oil consumption by increasing oil lifetime thanks to continuous oil purification by 100% long-strand cotton fibers (they can capture particles up to 1 micron) and oil dehydration by its flash evaporation process.
How it works
The O.P.S. receives the oil from the homogenizer’s lubricating unit tank; the oil is first forced into a strainer pre-filter then pushed into the main filter made by cotton base and after the filtering process the oil is not under pressure downstream the main filter and returns inside the homogenizer by gravity.
Advantages
- Continuous oil regeneration permits the highest machine performance
- Filters replacement avoids oil change every 2.000 hours
- No contamination (reduced bacterial phenomena) and no condensation
- Accurate and careful filtration system
- Run production guarantee during O.P.S. maintenance
- Installed in an easy-accessible position
- Service intervals are few and far between
- Reduced costs related to the waste of oil
- Environment friendly system
Reimagine liquids
It may surprise you how many products need homogenization in their manufacturing process to make them more compatible with your daily life. Stabilization and a longer shelf life have always been among the highest priorities in many different processing industries but, especially nowadays, as lifestyles continue to change rapidly, they are becoming more and more valued.
Downloads
Approfondimenti GEA
Assistenza GEA: l'ancora di salvezza delle linee di produzione mondiali
Una confezione di spaghetti su quattro, un litro di birra su due e un quarto di tutto il latte lavorato nel mondo dipendono dai macchinari GEA. Quando le linee di produzione necessitano di attenzione, il servizio assistenza GEA...
Il nuovo impianto di pompe in Polonia ridefinisce la produzione igienica
Lo stabilimento GEA di Koszalin, in Polonia, rappresenta un punto di riferimento nella produzione di pompe sanitarie. Il sito multifunzionale combina decenni di esperienza ingegneristica tedesca con soluzioni scalabili e digitalizzazione...
