Processi a valle

Tank bottoms

Tank bottom sludges contain a high percentage of oil that can be recovered as valuable products; not to mention the economic and environmental aspects of reduced waste volumes. These products are generally difficult to handle due to their high solids and emulsion content and high viscosity. The slop oils can vary in their composition and contain 10-70 % oil, 30-90 % water and 5-20 % solids. The oil viscosity can be very high and reach values of up to 600 cSt / 50°C.  The specific gravity of the oil (oil density) can vary from 0.8 to 0.96 g / ml.

Furthermore, low pH values and high chloride concentrations are additional challenges, and factors such as abrasive particles (sand), organic solids and the presence of asphaltenes must also be taken into account. If this sludge is not treated on-site, it must either be incinerated or sent to specialized treatment plants for further processing / disposal. Since this waste is also environmentally hazardous and difficult to transport, disposal for the oil industry is costly, driving a high demand for services that are able to process tank bottom sludge efficiently. Tank bottom oil treatment also recovers hydrocarbons that would otherwise be lost, which creates an additional value.

As an alternative to the cost-intensive disposal of slop oil, GEA has developed a method to recycle the oils in an environmentally friendly way. The advantages for customers: added value through 80-95 % recovery of salable hydrocarbons and reduction of the total disposal costs. The technical solution for recovering the valuable oil and minimizing its environmental impact is to combine mechanical separation technology in several stages with heating and the improvement of the separation effect by chemicals.

Approfondimenti GEA

Refrigerazione sostenibile per una catena del freddo orientata al futuro

L'importanza di una gestione di qualità della catena del freddo non deve essere sottovalutata. Garantire che gli alimenti deperibili siano sicuri e di alta qualità nel luogo di consumo è una responsabilità enorme per chi gestisce...

Josep Masramón and his daughter stand in front of their GEA batch milking installation.

Come il batch milking supporta l'industria lattiero-casearia moderna

L'ultima evoluzione della mungitura automatizzata è il cosiddetto "batch milking", che prevede la mungitura in gruppo a orari fissi, di solito due o tre volte al giorno. La tecnologia di automazione sta contribuendo a risolvere...

Dall'aria

L'accesso all'acqua potabile e ai servizi igienici è ancora difficile in molti Paesi. Le malattie causate dalla contaminazione dell'acqua potabile e la strada da percorrere ogni giorno per procurarsela impediscono a molti bambini...

Ricevi notizie da GEA

Resta in contatto con le innovazioni e le storie GEA iscrivendoti alle news di GEA.

Contattaci

Siamo qui per aiutarti! Solo pochi dettagli e saremo in grado di rispondere alla tua richiesta.