Double-seat valves
FLOWVENT Double-seal valves
The easy solution for CIP feeds: GEA FLOWVENT Double-seal valves can be applied as efficient alternatives for secure separation of incompatible products within CIP systems or gas blocks.
The easy solution for CIP feeds:
GEA FLOWVENT Double-seal valves can be applied as efficient alternatives for secure separation of incompatible products within CIP systems or gas blocks.
Function of the valve
The Double-seal valve separates media in two pipelines. The two seals are both located in one valve disc. Hence, they cannot be moved apart separately as in double-seat valves. Therefore, this valve type is recommend for CIP systems and gas blocks.
Application
Double-seal valves are predominantly used in areas where hygienic safety is not critical, e.g. CIP systems and gas blocks (brewery).
Technical data of the standard version
| Recommended flow direction | Against the closing direction |
| Material in contact with product | AISI 316L |
| Material not in contact with product | AISI 304 |
| Seal material in contact with product | EPDM, FKM |
| Ambient temperature | 0 to 45°C |
| Air supply pressure | 6 bar (87 psi) |
| Product pressure | 5 bar (73 psi) |
| Surface in contact with product | Ra ≤ 0,8 μm |
| External housing surface | Matte |
| Control and feedback system | FLOWVENT Control top |
| Actuator type | Pneumatic actuator air / spring |
| Connection fittings | Welding end |
| Identification | Adhesive label |
| Certificates | FDA |
Downloads
Productos relacionados
FLOWVENT Control top
GEA's state-of-the-art control top technology means you can set-up each installed GEA FLOWVENT valve unit automatically within seconds, even without special training.
FLOWVENT Shut-off valves
The key to guiding your process flow: GEA FLOWVENT Shut-off valves are used for easy shut-off solutions in hygienic applications.
FLOWVENT Mixproof valves
State-of-the-art for your secure applications: GEA FLOWVENT Mixproof valves are used for the hygienically safe shut-off of incompatible media at pipe intersections.
FLOWVENT Divert valves
The master tool for all changeover functions: GEA FLOWVENT Divert valves are used for easy changeover solutions in hygienic applications.
GEA Insights
Una visión realista del sector biotecnológico
El nuevo Centro de Aplicaciones y Tecnología (ATC) de GEA en Sarstedt, al sur de Hannover, no es una sala de exhibición ni sustituye a un laboratorio. Es un lugar destinado a realización de pruebas, recopilación de datos y toma de decisiones en una fase temprana. Es en este punto donde queda claro si un concepto biológico puede convertirse en un proceso industrial robusto. Ese paso es más importante de lo que podría parecer.
Cambios en el envasado de alimentos: 4 tendencias
El termoformado lleva mucho tiempo desempeñando un papel fundamental en el envasado de alimentos. Ahora se enfrenta a un cambio importante. A medida que se endurecen las normativas, evolucionan los materiales y aumentan los costes, las líneas de envasado formado, llenado y sellado deben hacer algo más que funcionar de forma fiable: ahora determinan cómo los alimentos se mantienen frescos, asequibles y reciclables. Eche un vistazo a las principales tendencias en termoformado que están marcando el panorama del envasado y entrega de alimentos.
