GEA nozzle bowl separators with a disk-type bowl feature nozzles at the periphery through which the concentrate is discharged continuously. The separated solids (concentrate) are continuously discharged through nozzles into the concentrate catcher. The solids concentration depends on the throughput capacity, the feed concentration, the nozzle diameter and the bowl speed. The desired concentration can be adjusted by exchanging the nozzles and regulating the throughput capacity. The concentrate flows off under gravity from the concentrate catcher. The product flows through the feed into the distributor of the bowl, is accelerated by vanes and passes through the rising channels into the disk stack where clarification takes place under the influence of centrifugal force. Special materials such as super austentite, super duplex, Inconel 625 are available. Erosion protection.
Downloads
Vídeos relacionados
Let’s get connected – digital solutions for GEA centrifuges
Let’s get connected – digital solutions for GEA separators and decanters
GEA Insights
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Más allá de la máquina: cómo potenciar el rendimiento de la planta
El hecho de que una máquina sea eficiente no significa que la fábrica lo sea. La mejora real suele comenzar por ir más allá de los equipos individuales y comprender cómo los procesos, los sistemas energéticos y las decisiones operativas se influyen mutuamente. Se trata de un enfoque holístico diseñado para descubrir oportunidades que, de otro modo, podrían pasarse por alto.
Cómo una válvula transforma la manera de elaborar alimentos y bebidas
En las plantas de alimentación y bebidas, las válvulas suelen accionarse mediante aire comprimido. GEA Hydract® Actuation Technology mueve las válvulas mediante agua, en un circuito cerrado controlado digitalmente. El resultado es una válvula que puede mantenerse en su sitio con exactitud y regularse con precisión. Esto se traduce en un menor consumo energético y un mayor control.
