Real-Time Characterization of Lyophilized Products
The lyophilization of pharmaceutical products such as vaccines enhances their stability and shelf-life. However, these properties can only be maintained when the resulting cake has a residual water level of 0.2–5.0%.
For this reason, regulatory guidance indicates that this parameter must be controlled and determined. Until now, however, techniques to measure such properties have been both destructive and time-consuming, and therefore uneconomical.
Our GEA LYOSENSE® sensor uses multipoint NIR measurements to comprehensively and non-destructively evaluate freeze-dried product cakes in real-time. This easy-to-install and use online measuring device is a fast and a non-invasive solution to moisture determination, enabling the effortless detection of residual moisture.
GEA LYOSENSE® STATION for Mobile Testing
The LYOSENSE® STATION was designed for the quick, accurate and mobile testing of pharmaceutical glass vials for residual moisture. Mounted on wheels for easy maneuverability, the LYOSENSE® STATION is 900 mm wide and can readily pass through the doors and corridors of most pharmaceutical production areas.
Functions and Features
The LYOSENSE® and LYOSENSE® STATION automatically measure the residual moisture content in lyophilized glass vials, which are manually loaded via a tray on the infeed turntable. Process parameters such as vial speed can be controlled using an integrated touchscreen and residual moisture limits can be controlled by a laptop via an interface. Checked vials are stored on the outfeed table and can be collected manually on the infeed tray.
The NIR sensors measure the vials from the side and/or from below. The results are sent to an external computer, which is isolated from the process area and reports any out-of-specification data. Rejected vials are collected in a container adjacent to the conveyor.
This miniaturized probe is simple to calibrate and enhances product development by facilitating Quality by Design. It also offers the following benefits:
- fast measurement and evaluation (5 ms)
- no required consumables
- simple and easy user interface and operation
- single person operation
- accurate analysis of residual moisture (0.2–5.0% water content)
- 100% vial inspection (from 16.25–33.00 mm) at a rate of up to 100 per minute
- rejection of out-of-specification vials.
Documentation and Testing
Our LYOSENSE® products are verified before delivery in a factory acceptance test (FAT). The results comprise part of the documentation package. Designed to comply with the European Union’s CE Guidelines, they are supplied with a manual, safety instructions and wiring diagram.
Real-Time Residual Moisture Determinationin in Freeze Drying Process with GEA LYOSENSE®
Downloads
Productos relacionados
LYOVAC® Pharma Freeze Dryer
GEA’s LYOVAC® industrial-scale freeze dryers are built to customer specifications and are available with production areas of 1–60 m² and condenser capacities of more than 1000 kg.
ALUS® Load & Unload of Lyophilizers
ALUS® Automatic Load & Unload Systems minimize the risk of operator/product contamination while loading and unloading a freeze dryer.
GEA Insights
El avance que revolucionó el secado por atomización
En 1976, los ingenieros de NIRO respondieron a un reto competitivo replanteándose las posibilidades del secado por atomización. Su idea se materializó en la torre multietapa MSD. Cincuenta años después, ese mismo principio fundamental contribuye a transformar los líquidos en los productos en polvo que se utilizan en productos nutricionales esenciales y en medicamentos importantes en todo el mundo. Perfeccionada a lo largo de décadas de experiencia en ingeniería, conocimiento de las necesidades de los clientes y desarrollo continuo, la torre de atomización MSD es una historia de innovación con un impacto duradero.
Más allá de la máquina: cómo potenciar el rendimiento de la planta
El hecho de que una máquina sea eficiente no significa que la fábrica lo sea. La mejora real suele comenzar por ir más allá de los equipos individuales y comprender cómo los procesos, los sistemas energéticos y las decisiones operativas se influyen mutuamente. Se trata de un enfoque holístico diseñado para descubrir oportunidades que, de otro modo, podrían pasarse por alto.
Cómo una válvula transforma la manera de elaborar alimentos y bebidas
En las plantas de alimentación y bebidas, las válvulas suelen accionarse mediante aire comprimido. GEA Hydract® Actuation Technology mueve las válvulas mediante agua, en un circuito cerrado controlado digitalmente. El resultado es una válvula que puede mantenerse en su sitio con exactitud y regularse con precisión. Esto se traduce en un menor consumo energético y un mayor control.
