VARIVENT® Flange Connections
VARIVENT® Flange Connection TK
An O-ring is used for sealing the VARIVENT® flange connection, and is given a defined compression by a metal stop. The O-ring is also protected by the special geometry of the recess from being pulled out at high flow rates.
The VARIVENT® flange connection (TK) can be ordered either as a complete connection including bolts and nuts (TK) or a groove flange (TN)/smooth flange (TF) as a connection fitting on a vertical port. If a complete connection is ordered as the connection fitting, the groove flange is welded onto the housing. The groove flange (TN) contains not only the O-Ring but also the required connecting elements.
Pipe Fitting Acc. to DIN 11851
Complete Connection GK
A sealing ring G is used for sealing the pipe fitting acc. to DIN 11851.If a complete connection is ordered on a housing pipe end, the male end is welded onto the housing. The groove flange contains the sealing ring G. The liner (KO) contains the groove nut. The pipe fitting acc. to DIN 11851 can be ordered either as a complete connection (GK) or male end SC (GO)/liner SD (KO) as a connection fitting on a vertical port.
Hygienic Flange Connection Acc. to DIN 11853-2
Hygienic Flange Connection ASK
An O-ring is used for sealing the hygienic flange connection acc. to DIN 11853-2, and is given a defined compression by a metal stop. The O-ring is also protected by the special geometry of the recess from being pulled out at high flow rates,
Furthermore, the flange connection is centered by the design shape. The sealing geometry of the hygienic flange connection corresponds to the aseptic flange connection acc. to DIN 11864-2.
The hygienic flange connection (ASK) can be ordered either as a complete connection including bolts and nuts (ASK) or a hygienic groove flange (NFK)/hygienic flange (BFK) as a connection fitting on a vertical port. If a complete connection is ordered on a housing vertical port, the groove flange is welded onto the housing. The groove flange (NFK) contains not only the O-Ring but also the required connecting elements.
Clamp Connection (Tri-Clamp)
Clamp Connection CO
The clamp connection acc. to DIN 32676 is a widely used connection fitting, especially in North America. The connection uses a symmetrically structured clamp connection with a seal located in between it, and is secured by a clamp. The second clamp connection, the seal and the clamp are not supplied.
Downloads
GEA Insights
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Beyond the machine: unlocking better plant performance
An efficient machine does not automatically make an efficient factory. Real improvement often starts by looking beyond individual equipment and understanding how processes, energy systems and operating decisions affect one another. It’s a holistic approach designed to uncover opportunities that might otherwise be missed.
How a valve reshapes the way food and drinks are made
In food and beverage plants, valves are commonly operated using compressed air. GEA Hydract® Actuation Technology moves valves with water instead, in a closed, digitally controlled circuit. The result is a valve that can be held exactly in place and steered in fine-tuned steps. This results in lower energy use and greater control.
