Double-seat valves
A special feature of this valve is that the pig can be conveyed through the cylindrical design of the housing. Pigging technology enables valuable products to be recovered at the end of the process step, thereby minimizing product residues in the pipe.
Type L_H,
Piggable Upside Down | Type L_S,
Piggable Upright | |
Material in contact with the product | 1.4404 / AISI 316 L | |
Material not in contact with the product | 1.4301 / AISI 304 | |
Seal material in contact with the product | EPDM, FKM, HNBR | |
Ambient temperature | 0 to 45 °C | |
Air supply pressure | 6 bar (87 psi) | |
Product pressure | 5 bar (73 psi) | |
Surface in contact with the product | Ra ≤ 0.8 μm | |
External housing surface | Matte blasted | |
Control and feedback system | Connection 0 (without control top) | |
Actuator type | Pneumatic actuator air / spring | |
Connection fittings | Welding end | |
Identification | Adhesive ID tag | |
Valve seat version | Welded seat ring | |
Certificates | 3-A, CE |
DN 40 - DN 100
OD 1,5" - OD 4"
VARIVENT® double-seat valves are used for mixproof shut-off of incompatible products at pipe junctions.
VARIVENT® mixproof valves type C and K are used as an efficient alternative for mixproof separation of incompatible products at pipeline junctions within CIP systems or gas blocks.
LoTo solutions available for all hygienic seat valves ensure a safe maintenance & commissioning of process plants. Use an easy-to-apply AIR LOCK to cut off the control air connection. Or replace the feedback system with a sturdy DISK LOCK to safely block valve action.
Recover the value - Reduce the waste: GEA VARICOVER Product Recovery System
The impact of global warming is increasingly apparent all over the world. Towns and cities everywhere face the same challenge: providing their communities with reliable, affordable, sustainably sourced heat. GEA spoke with an expert in the field, Kenneth Hoffmann, Manager, Heat Pumps at GEA Heating & Refrigeration Technologies, about tackling global warming faster.
Something caught Farmer Tom's eye. Instead of another product demo, GEA showcased innovations via AR. That's only the start of GEA's interactive digital farm.
GEA scientists are working with researchers at the Graz University of Technology to configure a homogenization process and technology that turns eucalyptus pulp into 3D-printed, organic structures mimicking human veins, arteries and other tissues.