Menu

Aseptomag® valve line

Leakage Bottom-seat Valves Aseptomag® DT

Aseptomag® leakage valves are used for the mixproof shut-off of pipelines at a tank in UltraClean processing plants. The moving valve stems are sealed by a stainless steel bellows.

Leakage Valve Aseptomag® DT

What distinguishes these valves from truly aseptic mixproof valves, is the leakage chamber between the valve seat seals. Any leakage that occurs at the seals is drained out through the leakage opening in a depressurized manner. This concept reduces the required installation effort as well as process complexity and energy consumption.

Main Components

Housing
Housings for leakage bottom-seat valves are available with one or two port connections. The valves are produced with standard butt-weld connections by default. In addition to the normal bottom-seat version, DT housings are also available with welded or screwed flange connections. 
 
Internal Assembly
The internal assembly in its standard execution is equipped with a hard PTFE seal for the axial, and an EPDM seal for the radial valve seat. In addition to the standard sealing material, also Tefasep® is available for the axial valve seat seal.
 
Actuator
The pneumatic actuator for the leakage valve DT is designed to be spring-closing/air-opening (NC). In the standard design, this permits the lifting of the bottom valve seat in addition to the full stroke.
 
Clamp
Due to its solid construction, the GEA Aseptomag clamp enables a pressure stable and safe connection of the main components. The special design with three segments allows a service-friendly handling of the component, even under tight space conditions.
 
Feedback units
UltraClean leakage valves can be either equipped with open feedback units or T.VIS® feedback systems by default. Feedback units from third party suppliers can be mounted via specially designed adaptors.

Technical Data

Item Size
Nominal pressure valve 10 bar
Closing pressure approx. 6 bar (depending on valve size)
Control air pressure 6 bar
Internal Assembly With sheet metal bellows
Valve seat seal material PTFE/EPDM
Surface quality in product area Ra ≤ 0.8
Material quality in product area AISI 316L
Operating temperature -20...+150°C

Higher closing pressures, other materials, higher surface qualities and higher operating temperatures are available upon request. 

For further information about the application of this valve type, please refer to the tab Aseptomag® valve line.

Aseptomag® Valve Technology

Aseptomag® aseptic valves are designed to meet the highest demands for aseptic processes in the dairy, food and beverage industry.

Aseptic bellows valves distinguish themselves with the uncompromisingly hermetic seal of the valve stem, thereby minimizing contamination risks and maximizing detection possibilities. The Aseptomag® valve line is the equivalent for aseptic processes to the hygienic VARIVENT® valve line and provides everything from shut-off and bottom-seat to mixproof and sampling valves. The valves meet the highest hygienic standards required, such as EHEDG and 3-A standards. Thanks to the modular structure, the Aseptomag® valve line also allows tailor-made valve solutions for specific process requirements (higher closing pressures, special materials, special design, etc). Aseptomag® valves can be equipped with T.VIS® control tops and can therewith seamlessly be integrated into an automated process plant.

UltraClean Applications

The most relevant product parameter for UltraClean applications is shelf-life. It is mostly determined by the pH-value and the aw-value of the product. In addition, sensory properties need to be considered as well as the logistical chain of distribution. One of the advantages of UltraClean processing is the reduced quantity of preservatives needed for maintaining the shelf-life of the product.

Application examples

  • Brewery industry – Beer and mixed beer beverages (e.g. pure yeast cultivation and connection of sterile tanks and filling machines after sterilization)
  • Beverage industry – Water-based mixed beverages (e.g. soft drinks, fruit juice and fruit-based beverages, concentrates, beverages with pulp)
  • Dairy industry – Milk-based and lactic acid-fermented products (e.g. ESL milk, dessert products, crystallizing products such as lactose)
  • Food and beverage industry – Sauces and delicacies (e.g. manufacture of basic fruit ingredients, incl. particulates such as nuts)

Aseptomag LV/DT at a Glance

  • Hermetic sealing by stainless steel bellow
  • Uncompromising detection possibilities
  • Easy and safe maintenance
  • Ideal fit for UltraClean mixproof applications

Sizes *

Valve type Metric Inch OD
Shut-off Valves Aseptomag® AV DN 15 – DN 150 0.75” – 6”
Shut-off Valves Aseptomag® AVBS DN 15 – DN 150 0.75” – 6”
Divert Valves Aseptomag® UV DN 15 – DN 100 0.75” – 4”
Shut-off Valves Aseptomag® AF DN 25 – DN 100 1” – 4”
Control Valves Aseptomag® RV DN 15 – DN 100 0.75” – 4”
Control Valves Aseptomag® RVIN DN 25 – DN 65 1“ – 2.5“
Back-pressure Valves Aseptomag® GD DN 15 – DN 150 0.75” – 6”
Shut-off Valves Aseptomag® AMV DN 06 – DN 10 0.25” – 0.5”
Leakage Valves Aseptomag® LV DN 40 – DN 100 1.5“ – 4“
Leakage Valves Aseptomag® DT DN 40 – DN 100 1.5“ – 4“
Leakage Valves Aseptomag® ADV DN 25 – DN 100 1” – 4”
Double-chamber Valves Aseptomag® DK DN 25 – DN 150 1” – 6”
Double-chamber Valves Aseptomag® DKBS DN 25 – DN 150 1” – 6”
Double-chamber Valves Aseptomag® DDK DN 25 – DN 150 1” – 6”
Double-chamber Valves Aseptomag® AXV DN 25 – DN 150 1” – 6”
Sampling Valves Aseptomag® PV DN 10 – DN 15 0.5” – 0.75”
Steam inlet valves Aseptomag® DE DN 25 – DN 40 1” – 1.5”
* Additional valve sizes and connection standards (i.e. ISO) available upon request

Related products

Back-pressure Valves Aseptomag® GD

Back-pressure Valves Aseptomag® GD

Back-pressure valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design.

Control Valves Aseptomag® RV

Control Valves Aseptomag® RV

Control valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design.

Control Valves Aseptomag® RVIN

Control Valves Aseptomag® RVIN

Control valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The inverted control valve is specifically designed for installations where product enters the valve from the bellow side.

Divert Valves Aseptomag® UV

Divert Valves Aseptomag® UV

Divert valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellows design.

Double-chamber Valves Aseptomag® AXV

Double-chamber Valves Aseptomag® AXV

Double-chamber valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The valve type AXV includes three integrated sterile barriers (ISB).

Double-chamber Valves Aseptomag® DDK

Double-chamber Valves Aseptomag® DDK

Double-chamber valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The valve type DDK includes two integrated sterile barriers (ISB)

Double-chamber Valves Aseptomag® DK

Double-chamber Valves Aseptomag® DK

Double-chamber valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The valve type DK includes one integrated sterile barrier (ISB)

Double-chamber Valves Aseptomag® DKBS

Double-chamber Valves Aseptomag® DKBS

Double-chamber tank bottom valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The valve type DK includes one integrated sterile barrier (ISB).

Leakage Valves Aseptomag® ADV

Leakage Valves Aseptomag® ADV

Leakage valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The valve type ADV includes one integrated steam barrier (ISB) and other than Aseptomag® DK valves, one valve seat is sealed via a radial form seal.

Leakage Valves Aseptomag® LV

Leakage Valves Aseptomag® LV

Leakage valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. With their leakage area between the two valve seats open to atmosphere, the valve is an ideal fit for UltraClean mixproof applications.

Sampling Valves Aseptomag® PV

Sampling Valves Aseptomag® PV

Sampling valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellows design and their modular structure.

Shut-off Valves Aseptomag® AF

Shut-off Valves Aseptomag® AF

Shut-off valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The extended bellow design of the type AF is ideal for applications with high activation frequencies.

Shut-off Valves Aseptomag® AMV

Shut-off Valves Aseptomag® AMV

Shut-off valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design. The compact design of the type AMV is ideal for fractional size applications.

Shut-off Valves Aseptomag® AV

Shut-off Valves Aseptomag® AV

Shut-off valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design.

Shut-off Valves Aseptomag® AVBS

Shut-off Valves Aseptomag® AVBS

Shut-off tank bottom valves of the Aseptomag® valve line are characterized by their uncompromising stainless steel bellow design.

Service products

GEA Insights

Stay in touch with GEA innovations and stories by signing up for news from GEA.

Sign up

We are here to help! With just a few details we will be able to respond to your inquiry.

Contact us