Magnetic Separators Aseptomag® MAS H
Magnetic separators of the type MAS H extract magnetic particles from the product. The innovative locking device enables maximum product and process safety while the manual deactivation of the magnetic field reduces plant downtime.
Main Components
Housing
Housings for magnetic separators are available with two ports executed with standard butt-weld connections by default. Other pipe connections are available upon request. The housing is identical for all three types (MAS B, MAS H & MAS PA) and includes an orientation point to enable ideal flow conditions inside the housing due to ideal positioning of the magnetic rods.
Magnetic Unit
The magnetic unit of the type MAS H contains 7 rods filled with multiple equally strong permanent magnets to create a consistent magnetic field inside the housing. The foreign particles remain at the rods and can therefore no longer harm components and machines. The cleaning of the rods is done manually and outside the process (cleaning out of place). The magnetic field inside the rods can by deactivated via a manual hand lever which results in significant simplification of the cleaning step.
Clamp
Due to its solid construction, the GEA Aseptomag® clamp enables a pressure stable and safe connection of the main components. The special design with three segments allows a service-friendly handling of the component, even under tight space conditions.
Aseptomag® Magnetic Separator portfolio
Areas of application
Magnetic Separators primary serve as protection of processing plants from foreign steel and other magnetic particles and consequently have a wide range of applications. The origin of foreign magnetic particles in a process varies. Typical sources are ferric products such as cacao or debris in raw materials such as fruits and vegetables.
Technical data of standard execution
| Item | Size |
| Nominal pressure | DN 40-80 / OD 1.5"-3" = 12 bar (174 psi)
DN 100 / OD 4" = 10 bar (145 psi) |
| Housing seal | Silicone |
| Surface quality in product area | Ra ≤ 0.8 (welding seams excluded) |
| Material quality in product area | AISI 316L |
| Max. operating temperature | 150 °C (302 °F) |
| Magnetic induction | Typ. 1220 mT (min. 1180 mT) |
Aseptomag® Magnetic Separators at a glance
- Maximum process and product safety due to uncompromising hygienic design
- Strong design focus on operational safety contributes to maximum plant availability / efficiency
- Can be also used for aseptic processes thanks to operating temperatures up to 150°C / 302°F
- Flexibility in plant design / planning thanks to possibility of vertical and horizontal installation
- Modular principle allows cost-efficient adaption of Magnetic Separator to customer needs
Related Products
Magnetic Separators Aseptomag® MAS B
Magnetic separators of the type MAS B are equipped with a magnetic unit incorporating the permanent magnets which remain in the rods at all times.
Magnetic Separators Aseptomag® MAS PA
Magnetic separators of the type MAS PA are suitable for cleaning in place processes. The magnetic field can be deactivated via a pneumatic actuator which enables our customers to run the magnetic separator in a fully automated process.
