Vacuum Technology
Steam jet ventilator
Steam jet ventilators are based on proven jet pump technology and often used to convey air, gases and vapors.
Applications
Steam jet ventilators are used to:
- To draw of waste air, exhaust gases and vapor
- To ventilate tanks
- As forced blast blowers, or stack ventilators for boiler burners
- To extract and mix exhaust gases from the thermal afterburning
Mode of operation
Steam jet ventilators convey air, gases and vapors against small pressure differences. They operate in a range between ∆p = 0 to 500 mbar. Above 500 mbar, steam jet compressors are used.
The achievable pressure difference between the suction pressure and discharge pressure is the compression of the steam jet ventilator.
Instead of steam, it is also possible to use compressed air or another gas as motive fluid for jet ventilators.
Apart from steam, air or gas, liquids may be used as the motive medium for jet ventilators.
Advantages
- No moving parts
- Maintenance-free
- Can be installed in virtually all situations
- Quickly and easily put into operation
- Almost unlimited life, when a suitable material of construction is chosen
- Can be manufactured from various materials of construction
- Low acquisition costs
As opposed to liquid jet ventilators, steam or gas jet ventilators have the advantage that larger pressure differentials can be managed.
Downloads
Related Products
High Corrosive Resistant Vacuum Systems
Multi-stage steam jet vacuum pumps in graphite for corrosive applications.
Variable - Flow Ejectors
Variable - Flow Ejectors are based on proven GEA jet pump technology and often used for heat recovery.
Steam jet compressor
Steam jet compressors type bv1 are based on proven jet pump technology and often used used in evaporating, distillation, cooling, crystallization, deodorization, degassing and drying under vacuum.
Liquid jet liquid pump
Liquid jet liquid pumps are used for conveying and mixing liquids such as water, acids or lye in water and waste water treatment plants.
GEA Insights
GEA opens new technology center, strengthening its position in the growing pharmaceutical applications market
Together with Mona Neubaur, Minister of Economic Affairs of the German state of North Rhine-Westphalia, GEA CEO Stefan Klebert has opened a new technology center for pharmaceutical freeze-drying systems in Elsdorf, Germany. GEA employs approximately 260 people at the facility, which combines research and development with production and service under one roof.
