Because manure storages pits varied in types and sizes, GEA has extended the strength and power of the Vertical Agi-Pompe in six different configurations.
- Stationnary
- On trailer
- With a tilting 3-point hitch
- With a 3-point hitch for aboveground tank
- On trailer for aboveground tank
Key Features
- Oil cooler
- Low maintenance 300 gearbox protected by our 3 seal system on each shaft to protect against contamination.
- 24" (610 mm) heavy duty propeller. Provide constant agitation of up to 21 500 US gpm (81 386 lpm) in loading mode as well as agitation mode.
- 150° rotating propeller.
- Speed reducer to safely change the direction of the propeller anytime.
- Rotating valve that can be operated while the pump is at low RPM with visual indicator rod, to know if the pump is working on agitation or loading mode.
- 20" (508 mm) impeller featuring self-cleaning blades, reversible knives at the intake and abrasive resistant steel housing/bottom plate.
- Knife kit on propeller to cut fibrous material and aid in the discharge of manure.
- Remote grease line kit. To lubricate the bearing housing without removing the pump.
- Impeller housing made of Abrasion Resistant steel.
- 6" (150 mm) discharge.
Agitation Nozzle
- High velocity agitation nozzle.
- Ball-and-socket joint with a stainless steel ball and urethane gasket for reliable and long lasting operation.
- 3" to 4" (76 to 102 mm) opening for maximum HP efficiency.
- Anti-swirl device for maximum velocity and precision.
- 200° horizontal rotation and 60° vertical articulation.
- Also available with speed reducer to easily change the direction of the nozzle and hydraulic height adjustment.
Downloads
Related Products
Articulated Agi-Pompe
The concept of the articulated pumps offered by GEA is to have the pump attached to the tractor with a solid 3-point hitch and two hydraulic controlled articulations allowing positioning the pump into a lagoon or a concrete pit.
Articulated Super Pump
The Articulated Super Pump allows far-reaching access into concrete pits and provides power entirely concentrated on manure pumping.
Irrigation Pumps
Transfer liquid manure of a maximum consistency of ¼" (6 mm) at very high pressure.
Lagoon Agi-Pompe CA8
This model of lagoon Agi-Pompe is especially designed to manage manure in deep lagoons.
GEA Insights
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Beyond the machine: unlocking better plant performance
An efficient machine does not automatically make an efficient factory. Real improvement often starts by looking beyond individual equipment and understanding how processes, energy systems and operating decisions affect one another. It’s a holistic approach designed to uncover opportunities that might otherwise be missed.
How a valve reshapes the way food and drinks are made
In food and beverage plants, valves are commonly operated using compressed air. GEA Hydract® Actuation Technology moves valves with water instead, in a closed, digitally controlled circuit. The result is a valve that can be held exactly in place and steered in fine-tuned steps. This results in lower energy use and greater control.
