Key Features
- Direct drive only.
- Available motors: 3.5 or 7.5 HP. Not available for 50 Hz electric motor.
- 3" (75 mm) pipe discharge.
- Drive shaft with an anti-vibration bearing. Also available on bronze bushings without oil bath.
- Stainless steel threaded shaft to prevent rust and corrosion.
- Double bearing housing protected by our 3 seal system.
- Available in lengths from 6 to 16 feet (1.8 to 4.8 m)
Typical Application
Used to transfer hog manure or dairy waste water from a reception pit to the main storage.Optional Features
- Rigid Agitation Nozzle
- 285° horizontal rotation
Downloads
Related Products
8-Inch Flush Pump
Low revolutions pump offering a high flow rate and remarkable performance to feed a flush system.
4-Inch Agi-Pompe
Stands out from the other pumps because of its ability to provide both high performance pumping and high efficiency agitation.
4-Inch High Pressure Pump
Reaches its full potential when responding to high head pressures or when used to transfer relatively long distances.
4-Inch Dairy Manure Pump
The perfect balance between pressure, flow rate and agitation quality for efficient and optimal results.
GEA Insights
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Beyond the machine: unlocking better plant performance
An efficient machine does not automatically make an efficient factory. Real improvement often starts by looking beyond individual equipment and understanding how processes, energy systems and operating decisions affect one another. It’s a holistic approach designed to uncover opportunities that might otherwise be missed.
How a valve reshapes the way food and drinks are made
In food and beverage plants, valves are commonly operated using compressed air. GEA Hydract® Actuation Technology moves valves with water instead, in a closed, digitally controlled circuit. The result is a valve that can be held exactly in place and steered in fine-tuned steps. This results in lower energy use and greater control.
