Key Features
- 8" (200 mm) discharge;
- Height adjustment hinged undercarriage with floatation tires.
- Air relief valve;
- Heavy-duty drive line with #55 PTO;
- Easy access for maintenance of the driveline joint;
- Low maintenance gearbox protected by our 3 seal system on each shaft to protect against contamination;
- 8" (200 mm) directional valve for either agitate or transfer manure. It can be operated while pump is at low RPM;
- Nozzle mounted above the liquid with 180° horizontal rotation and 130° vertical articulation;
- 4" adjustable nozzle
- Double-hinged articulation on agitation nozzle for constant flow with less restriction;
- Impeller housing made of Abrasion Resistant steel.
- Remote Grease Line Kit to lubricate the bearing housing without removing the pump;
- Knife kit on propeller.
Typical Application
Options
- Multipurpose undercarriage for 32', 42' and 52' (10, 13 and 16 m) with or without double wheels
Downloads
Related Products
Articulated Agi-Pompe
The concept of the articulated pumps offered by GEA is to have the pump attached to the tractor with a solid 3-point hitch and two hydraulic controlled articulations allowing positioning the pump into a lagoon or a concrete pit.
Articulated Super Pump
The Articulated Super Pump allows far-reaching access into concrete pits and provides power entirely concentrated on manure pumping.
Irrigation Pumps
Transfer liquid manure of a maximum consistency of ¼" (6 mm) at very high pressure.
Lagoon Agi-Pompe
These heavy-duty pumps will rapidly homogenize liquid manure in lagoons.
GEA Insights
The breakthrough that changed spray drying
In 1976, NIRO engineers responded to a competitive challenge by rethinking what spray drying could do. Their idea became the multi-stage dryer MSD. Fifty years later, the same fundamental principle helps turn liquids into the powders used in essential nutrition products and important medicines around the world. Refined through decades of engineering expertise, customer insight and continuous development, MSD is a story of innovation with lasting impact.
Beyond the machine: unlocking better plant performance
An efficient machine does not automatically make an efficient factory. Real improvement often starts by looking beyond individual equipment and understanding how processes, energy systems and operating decisions affect one another. It’s a holistic approach designed to uncover opportunities that might otherwise be missed.
How a valve reshapes the way food and drinks are made
In food and beverage plants, valves are commonly operated using compressed air. GEA Hydract® Actuation Technology moves valves with water instead, in a closed, digitally controlled circuit. The result is a valve that can be held exactly in place and steered in fine-tuned steps. This results in lower energy use and greater control.
