GEA OptiPartner® NiSoMate® is a stand-alone, in-line sensor-based device designed to monitor key fluid parameters continuously and in real time during the entire production cycle. Quality monitoring is based on ultrasound technology, which defines the physical characteristics of the processed fluid by analyzing variations in the speed of sound passing through the product itself.
How it works:
Its sensors and temperature probes can measure fluid properties and quality both before and after homogenization, generating reliable reference curves. The many parameters that the device monitors include particle size distribution, dilution, density, change in consistency, and temperature among others.
OptiPartner® NiSoMate® can be calibrated directly in situ and on the product(s) to set the required quality: the registered parameters are then stored in the system as reference for in-line analysis. The calibration develops a fingerprint for up to 250 configurable recipes. Then, the device measures and stores the fingerprint of each recipe in the controller, using it as the set point for product evaluation.
During production, the operator selects the recipe on the device control panel, and the device continuously compares the measured parameters to the recipe’s fingerprint. When deviations from the recipe are detected, an alarm alerts the operator, allowing them to adjust operating parameters in real time.
This minimizes product waste by ensuring consistent quality throughout production, eliminating reliance on spot sampling.
Key benefits of GEA OptiPartner® NiSoMate®:
Energy efficiency. Designed to help operators achieve the required product quality at the lowest pressure possible, optimizing energy consumption. High versatility. Tailored to customer requirements, customizable for all kinds of products, and compatible with all installations – from table-top units to industrial plants, on both new and existing machines. Safety and hygiene. CIP and SIP able, it meets even the most demanding requirements in sanitary and aseptic lines. Sensors are not in direct contact with the product for maximum safety and hygiene. Reduced waste. Automated configuration, continuous monitoring, and real-time process adjustments reduce the risk of product rework and loss. Improved plant capacity. No need to wait for laboratory analysis on product samples maximizes machine availability.
Additional benefits:
OptiPartner® and NiSoMate® are registered as trademarks in several countries worldwide.
İlgili Ürünler

Ariete Serisi Homojenizatörler
Ariete makineleri, güçlü, güvenilir, yüksek basınçlı homojenizatörler ve özelleştirilmiş çözümler için modern bir teknolojidir.

GEA Ariete Homojenizatör 5400
Ariete Homojenizatör 5400, dünyanın en güçlü homojenizatörüdür

GEA Ariete Homojenizatör 3160
Modern ve yüksek basınçlı Ariete Serisi homojenizatörler oldukça çok yönlü olup, çeşitli uygulamalar için oldukça özelleştirilmiştir: süt ürünleri, içecek, gıda, ilaç, kimyasal ve kozmetik endüstrileri.

Homogenizers Pilot Plant
Pilot plant homogenizers are designed for continuous operation up to 1500 bar and limited productions easy plug & play installation, simple operation and quick maintenance.
GEA İçgörüleri

Sprey kurutmayı değiştiren dönüm noktası
1976 yılında, NIRO mühendisleri, sprey kurutmanın neler yapabileceğini yeniden değerlendirerek rekabet ortamındaki bir zorluğa yanıt verdiler. Fikirleri, çok aşamalı MSD kurutucusuna dönüştü. Elli yıl sonra, aynı temel ilke, sıvıların dünyanın dört bir yanında temel besin ürünlerinde ve önemli ilaçlarda kullanılan tozlara dönüştürülmesine yardımcı olmaktadır. On yıllarca geçmişe dayanan mühendislik uzmanlığı, müşteri anlayışı ve sürekli geliştirme ile olgunlaşan MSD, kalıcı etkiye sahip bir inovasyon öyküsüdür.

Makineden fazlası: Daha iyi bir tesis performansının kilidini açar
Verimli bir makine, otomatik olarak verimli bir fabrika anlamına gelmez. Gerçek iyileştirme, genellikle münferit ekipmanların ötesine bakıp proseslerin, enerji sistemlerinin ve işletme kararlarının birbirlerini nasıl etkilediğini anlamakla başlar. Bu, normalde gözden kaçırılabilecek fırsatları ortaya çıkarmak üzere tasarlanmış bütünsel bir yaklaşımdır.

Bir vana, yiyecek ve içeceklerin üretilme yöntemini nasıl yeniden şekillendiriyor?
Yiyecek ve içecek tesislerinde, vanalar genellikle tazyikli hava kullanılarak çalıştırılır. GEA Hydract® Actuation Technology, kapalı ve dijital olarak kontrol edilen bir devre içinde vanaları su yardımıyla hareket ettirir. Sonuç, tam olarak yerinde tutulabilen ve hassas ayarlanan adımlarla yönlendirilebilen bir vanadır. Bu, daha az enerji kullanımı ve daha fazla kontrol sağlar.
