T.VIS® Control & Feedback Systems

The ideal solution for the majority of application points with a maximum requirement of two feedbacks and up to three solenoid valves.

For all GEA Hygienic butterfly valves
For all GEA VARIVENT® Valves*
For all GEA ASEPTOMAG® and GEA D-tec® Valves*
_{(*except with monitored seat lifting)}

The T.VIS® Q-15 used to control and monitor overflow valves of the VARIVENT Q series can optionally be equipped with solenoid valves. The proximity switch is mounted in the valve lantern as standard.

The explosion-proof T.VIS® E-20 was developed to meet the requirements and wishes of the beverage, food, and chemical industries, where hazardous gases can occur during processing. Likewise, dust explosion was taken into account to enable valve operation in powder atmospheres e.g. in the dairy and pharma industries. The GEA T.VIS® E-20 control top provides a maximum level of protection, certified worldwide, for hazard zones 1/22.

As a controller based on the technology of the T.VIS® A-15 with path measuring system, the T.VIS® P-15 in combination with an air-spring actuator can move to any required valve position between the open/close positions.

The T.VIS® P-15 is characterized not only by its performance but also by its ease of operation and outstanding price/performance ratio.

The T.VIS® V-1/V-20 is a position indicator with feedback system and optional solenoid valves, specially designed for sterile linear process valves in the GEA VESTA® series.

This control top can be customized with up to 2 solenoid valves for single-acting actuators.

The T.VIS® P-1 is a position controller in the design of the VESTA® V-1 Control top for sterile control valves in the GEA VESTA® series.